Search results for query: *

I am building a front k frame and suspension for a 65 Valiant that I bought. The previous owner removed all of this and threw it away because he was going with a straight axle and motor plate, so I have nothing from the 65. I do have a 66 Valiant that is providing the k frame, torsion bars...

i need a back glass to replace the one in my car. The previous owner tied a tarp with bungy cords over it and left it in the West Texas spring wind. It scratched the glass over a large area, to the point you can feel it with your finger nail. I have found a few glasses, but always 2-400 miles...

Had a little time this afternoon, so I decided I would swap the front hubs on the Barracuda since the previous owner put them on the wrong side. Simple job, just take them off, clean the rust off and clean the threads, paint and put them back on the proper side. Took off the drivers side first...

I have a 65 Valiant 200 convertible that came with a 225/ auto on the column. I do not have a transmission, but can get a 904 out of a 63 dart. Will it hook up to the 65 cables that come off of the column? My other option is to swap in a 66 a body column and a later linkage shift 904.

I just picked these up the other day. They are 15x4.5" in a 5x4" bolt pattern.

So, what all did this package consist of? I know the intake was different, as was the air cleaner, but what else? What does the extra port in the intake do and where does it go to in the intake?

I has anybody done this? I have a 65 Valiant 200 convertible that is a slant six car and the original motor and trans are gone. I have a 66 225//904 that I am going to swap in so I need the steering column that has the linkages instead of the cables to make it work. Is there any other problems...

I have to take a car to the local sheriff 's office to get a inspection and paperwork to file for a bonded title. Being they are young, not car guys and probably have never seen a 65 Plymouth before, I am anticipating having problems when they see there are no rivets holding on the VIN plate...

I bought a 65 Valiant Signet that the PO had taken out the 1/4 glasses out of and tossed everything except for the glass. No channels, regulators brackets or anything. Thanks to Lee Robinson for sending me the parts to put everything back together. My question is does anyone have a diagram or...

I have a 65 Valiant Signet hardtop and the previous owner removed the 1/4 glass, and removed the regulators and channels and threw them away. He did keep the glass and I have it. I have a 65 Dart GT parts car that has all of the stuff that is missing from the Valiant. Now, does anyone know or...

I am stuck home and my wife is watching old Lucile Ball shows. In this episode she takes her son to go get his DL in a 65 Dart GT Charger Convertible! Amazing.

I need a Signet emblem for the deck lid on a 65 Valiant. This is the round emblem with the Valiant symbol that goes in the center of the deck lid. Does anybody know if a 64 Emblem is the same as the 65 emblem? Thanks, B-onefan

This weekend I picked up a set of 5 x4" bp Cragar SS's from another member. Now I need to know where I can get 7/16 left hand shanked lugnuts for these. I really don't want to change the studs because they will not be on the car long, and I may want to put them on another down the road.

I have to put a complete front and rear suspension under my new project. I have never done this under a early A body before. Any help or comments would be appreciated. I started looking thru my parts stash last night. I have a 66 Valiant K member, and a 74 Duster complete disc brake setup and 8...

I picked up a 65 Valiant 2 Door HT. The previous owner removed and threw away the 1/4 window regulators, and tracks. He did keep the glass and the bracket that mounts to the bottom of the glass. My question is, I have a 65 Dart GT HT parts car, will the 1/4 window regulator and track hardware...

Does anybody know if somebody is making the roof line weather-stripping for a 64-66 Valiant? I know Metro Molding makes one for the Barracuda, and it is close, but I was thinking it would be too short around the top of the 1/4 glass. I have only the chrome trim that holds it. The previous owner...

I drove to Topeka, Kansas on Saturday (1250 miles round trip)and picked up this car. It is a 65 Valiant Signet, originally a /6 auto car, long gone though. I bought it for parts for my 65 Valiant , original 273 Commando convertible.

OK, so I have decided to get the 65 Valiant 273, 4 door 4 speed running and driving. I need new carpet. Now, I can find a 2 door 4 speed carpet and a 4 door auto carpet, but not a 4 door 4 speed carpet. Are they really that different? I thought the floorpans were the same, therefore a 2 door...

Anybody ever seen a factory 273/2bbl/ 4 speed Valiant 4 door with 9" drum brakes all around? Everything is original, #'s have been run and confirmed as a V-8. I have searched all over and cannot find anything that indicates changes or work done to the car. SO # on fender tag is 907. Vin is...

I picked up the last car of 4 I bought this spring. The car is a Signet V-8/ auto, convertible. It has no motor or trans. As I was loading it I noticed it had a 5-6" notch made into the rear valance on the drivers side. I looked it over and it is factory made into the valance and has a bracket...

I need to strip the old black paint and repaint the inserts and around the letters on the chrome, rectangle emblems that go on the upper metal part of the inner door and clip in the round holes. The chrome is in good shape and I don't want to damage it in any way. I was thinking about low...

Few weeks ago I bought a package deal of 4 65 A bodies. Today the 2nd car arrived to it's new home. This is a 65 Dart GT that hauled ***, at one time. Now it's regulated to parts car duty for the 65 Dart GT Convertible that I got 2 weeks ago. Both cars are 273, auto, a/c cars. The speedo shows...

What color combo's did your Dart GT come with from the factory? Outside, interior paint, door panels, carpet?

I picked up a fairly clean car this past weekend. I is a Dart GT convertible, with a 273/auto with factory a/c. The car is stripped of all the chrome and trim and ready for body work and paint. The interior is out and most of the door panels and cardboard stuff was left outside and got wet and...

Are these the same as a ht/sedan car?

I bought a package deal yesterday and one of the cars is a 1965 Dart Convertible. It is completely stripped down of all trim, but has all the trim and more. It does have holes down the top of the front fenders and doors and the 3 vents on the fender and front of the doors. I also got a 65 Dart...

Here is the newest project. A friend found this one for me. Guess it is payback for all the times I found him a deal he couldn't do without.

I need to purchase 3 of these. Has anyone ever used any of the ones on e-bay for $129-149 w/ free shipping? I was wondering what kind of luck people have had with these cheap tanks. I also see some good looking ones for $189-229 range that are probably better quality. Any advise would be...

I have a 66 Dart 2 dr sedan, that has a /6 and 3 on the tree. I have a parts car that is a 66 Barracuda 273/4bbl/auto and also have a 4 speed out of a 66 Dart GT/ 273 4bbl car. The Dart GT was wrecked hard, so I parted it out 10 years ago and got the trans/bellhousing and a few other parts. I...