Search results for query: *

I have searched a number of threads but cannot find reference to a self leveling seam sealer which comes complete with dispenser / applicator doo-dad. I am looking for 2 - part epoxy type preferably thick as molasses but still self leveling. Doing my drip rails. I cleaned them out with thin...

Well, I am sick of trying to electroplate all kinds of items since it is difficult to get large items to plate, and a set of rotors to come out all half assed (granted obviously my zinc system is just home brew). So, I am going to be sand blasting and painting / baking some of the more complex...

I sand blasted clean, SPI epoxied, waited an hour and painted these wheels with XO-Rust gloss black. Its friggin oil based it says. I did not have any good gloss black around and my rear end housing turned out great. This on the other hand did not turn out great. Although I may have a solid...

I have a pretty good store credit with eastwood cause I returned their "heavy duty" vibratory tumbler. Wanted to buy some truck bed liner or por-15 or something totally hard to put in the wheel wells. I completely sand blasted, epoxied the underside and inside, painted it green underneath and...

I am interested in relieving a little above the tire in the outer upper wheel well on the rear. Shown in the pics circled in black, highlighted in green, are what I would like to massage with a hammer. My main an only concern is distorting my quarter panel where it interfaces with the wheel...

Well, I decided to change the color of my car right after blasting it all, degreasing, epoxy and base / clear. Fortunately I am only on the under side and have finished the interior re-paint. I did a good job of sanding with 320 and very detailed scotchbrighting followed by de-greasing the...

Well, I managed to strip my car completely excluding the rear window, steam clean it bare, sand blast a lot of it more bare. Soaked it with SPI etching epoxy. Working my way towards the back under the car currently. I am using Eastwood's inside frame spray kit too. Just used an entire can on...

Well, I just picked up this vibratory tumbler from Eastwood. My initial plan was to eliminate holding parts in front of my sand blaster for hours to get them ready for zinc, nickel or blackening. http://www.eastwood.com/ew-hd-vibratory-tumbler-w-media-pushbutton.html The price is not...

Hi, Has anyone used these folks? http://southernpolyurethanes.com/ I just ordered their 50/50 makes 2 gallons of metal etching epoxy primer. I am really looking forward to coating everything in the world with epoxy. Heck I may epoxy the cows in the adjacent field. They do not...

Anybody know if this is a factory or dealer installed unit? It was installed with one screw under the steering column, appeared aftermarket halfass installation. I yanked it off when I removed the column, bending it. I am about to chunk or shoot it, unless its worth a half a billion dollars or...