Search results for query: *

So I know it’s not an abody. But this is my go too lol. Taking the lean burn off of my 86 fit have. I’ve put on a brand new 2bbl none electric control ditched the distributor and put in a Chrysler electronic ignition and vacuum adv distributor. It fired right up. Ran for 20-30 seconds like...

I know it’s a truck.. but..... I took the 2bb off of my 360 and put a low deck weiand single plane on it with a brand new Holley 600. Runs super rich. There’s no vacuum leaks? I’ve changed the intake gaskets 3 times. No leaks . I’ve put on 2 different brand new Holley 600 vs. also...

So. I haven’t found anyone who has tried this only. I’ve always wanted too. Since I put black widows mufflers on my bb I’ve loved them. Had them on a v8 Audi also. No drone. So. Being the hillbilly I am. I drill a 2” hole through some eBay single chambers. Basically flowmaster super10s...

So after a 3.5 hr drive down to southern Cali For a pile of crap that the guy blatantly lied to me about. Didn’t get what I went for ‍♂️ 3.5 hrs one way with empty trailer over the grapevine. Then back. Only end to up driving to a town about 30 minutes away from my house To pick up this...

Welp. Blew up my rear end. ‍♂️‍♂️

Black widow race venoms with roller cam. Not a lot of videos of big block mopar with black widow mufflers. So here you go. Just a idle video. Will post burnout shortly 440. Roller cam. Harland sharps. Torker2. 950 brawler carb.

so what kind of air fuel ratio do your guys big blocks like with nitrous. I’ve been reading some say low 11s. Last time on dyno it was tuned 12.5 with 150 nx plate. Got just over 100 whp on 150 jets.. I’m going to go try to tune it best I can before I go back to dyno. I just put on a...

how crappy to be ripped off by a fellow member...... When you sell something on here. BE HONEST. Thanks for nothing badlilred. $165 down the toilet what a ***

So. I am about to put a new oil pump on my 440 in 71 dart. After putting it on. Can I use my accumulator to keep the oil pressure up and just start it. Then if the oil drops to much. Turn it off. Reset the accumulator with air. Repeat? Thanks. I guess mainly curiosity? I work at...

so after putting car on dyno in Bakersfield ca. Short story shorter. Floated valves at around 6200. 6400 rpm. Engine is 440. .30 over. Howards hydraulic roller.150 NX plate. 516 heads. At time on dyno it had isky adjustable rockers. Now has Harland sharps. The next day when I pulled car off...

So it's been a while since I've been on here. Updated 71 dart swinger.full interior. I'm curious what u guys think it will run. Set up as follows. 74 truck 440 .30 over 9.5:1 comp 915 heads.ferrea valves, Howards custom grind cam. Hydraulic roller .565 lift both sides. 294 303 duration...

so here is my bogle guys i have a 75 power wagon and a 75 plymouth trailduster. both are in good shape and i have a built big block 1 ton axles fron and rear dana 60 rear 44 front. the trailduster is a full take off top. trailduster has just under 11 inches of lift with 40inch tires and 1 ton...

well guys i finaly got my new job i have wanted forever at the dodge dealership freakin so excited heck yeah im gunna be thier new mechanic

hey guys so i found a pair of small block 302 heads ya know heart shaped close chamber heads , i know the y have like the 1.77 intake and 1.50 exuast valves or something like that. im curious if any one knows if i can put some 2.o2 and 1.60 s in them i can get the heads for almost...

well i realy realy realy dont want to sell my dart at all but im kinda in a rut and have to. i want to ask u guys wut u think i could ask for it. its a 71 dart swinger 360, about 360 hp 8 3/4 rear 3.55 posi interior has ratchet shifter and two nice kragan bucket seats. 360 engine...

so im 24 and live in central cali. and i seriouly thinkg there are maybe 4 and a half mopar guys in my town, are all of the mopar guys east cuz its pretty lonley in a chevy ford town.lol. so im curious were everyone is from

what is the biggest cam u could put in a small block that got stock j heads before the valve will hit the piston i have 360 j heads thanks guys

so guys were can i find some good roller rockers for a small block, but im not looking to spend 500$ either so if any one knows i could realy use them thanks guys

so what is the best free drag or dyno simulator out there and were can i download it from thanks guys

so has anyone used the desktop dyno system or dragsim system i have used both and curious wut u guys think my car shud run car is 71 dart swinger back seat is out and back half is choped so less weight car is 360 engine .509 292 duration torker intake 750 eddy headers 2 1/2 exuast 727 w/...

well i just had a tourque converter take a dumb, it was a tci 2200-2600 stall. jurious if i should go a bit higher stall and high high u guys think i should go 360 engine .509 292 duration torker intake 750 eddy headers 2 1/2 exuast 727 w/ shift kit and deep pan and tranny cooler 8 3/4...

well looks like im movin back to utah salt lake city area. is there any mopar guys from around that area in this forum

ok guys i have an extra bit of money and lookin to put on some nitrous oxide on my dart. im lookin to get just a bit more umph from it... dont know how much i should go though ive heard i could go 40% of stock power..im thinkin i might be able to get away w/ 100 shot what do u guys think...

well this sux. i just put a tci 2600 stall converter in my dart a few weeks ago and now it is no good, so im thinkin should i go w/ b m or just get another tci what do u guys think

what is the biggest cam u can put in an engine w/ 360 j heads. like what is the biggest lift i can put withough it going to far

im looking for a body headers for small block i smashed mine real good while i was racing some one and hit a huge hump and flattened drivers side lol

so guys, i have a holley 750 dp w/ the primaries cut off and a eddy 750, which is the better carb, im leanin more towards the holley...what do u guys think holley or eddy same cfm

so i wanna put my holley 750 DP back on my car does anyone have the floats out of one that i could buy...

so doesn any one else have a mopar tattoo i have the mopar m on back of my right arm just above elbow w/ flames around it and smoke going up the back of my arm weaving in and out of 8 pistons , just curious if any one else has a mopar tat

so i have a 360 71 dart swinger w/ .509 292 duration... what should i try to set timing at like what is total timing and what not. like timing at idle and timing advance and how do i figure this out...