easyrider
65 droptop
My 65 dart has a 273 engine. The guy I bought it from said it was original engine. What I'm trying to figure out is the intake. It's a 2 barrel but has an EGR valve. I don't think that is correct on a 65 273. Any ideas?
In 1965 the casting number did not have "273". That was later, and maybe only started with the 318. I have two 65 blocks.it is cast in the side of the block (casting number)-273-x etc.
It's a stinking 2 barrel. I want a 4 barrel on it. Not so much for performance, but so i can buy the dress-up stuff for it. Chromeing out a 2 barrel is kinda like kissing your sister, just something wrong with that!
like kissing your sister,
pics of the sister are required before rendering a judgement on that. Lol
!!!lol!!!
In 1965 the casting number did not have "273". That was later, and maybe only started with the 318. I have two 65 blocks.
The OP definitely needs to find what heads he has before buying an intake manifold since the bolt hole angles and size changed in 66+.
9/16" wrench takes the bolts out.
And by the way... that throttle pressure linkage doesn't have a free return slot so it could hold the throttle open. It should go in the garbage.
Could you show me a correct one?
9/16" wrench takes the bolts out.
And by the way... that throttle pressure linkage doesn't have a free return slot so it could hold the throttle open. It should go in the garbage.
Could you show me a correct one?