Josh owen
Bang em till it breaks
What's the going rate for a 71 340 bare block now days? I found one but dont know what they are worth
Don't pay too much....until you get it to a machine shop you don't know what you got!! If it checks out good then give the old guy what you think is fair.I'm paying $50 so I knew i was in the clear but now i know i better pay the old guy more so I dont feel guilty
I'm paying $50 so I knew i was in the clear but now i know i better pay the old guy more so I dont feel guilty
Maybe if your sold your Astro Turf? And got Real grass. Maybe your luck would change.I'm Jealous! Wish I could find one that cheap...
I hate you! Im jealous beyond words
I'm paying $50 so I knew i was in the clear but now i know i better pay the old guy more so I dont feel guilty
If you get tired of looking at it, I'll help you out and get it out of your line of sight.I'm putting it in my 71 duster but deals are out there still for sure just sadly internet has a high mark up
Before going that far overbore, I would sonic check it. It's the only way to know you're in the clear.odds are this will be going .060 and acquiring a stroker crank we have one that's 340 based 422ci yet to be started but will probably build another one with a bit bigger cam than the last one since this one will have a ln A833 behind it rather than an auto BUT these cylinder walls have minimal rust and I mean barely any to.catch with finger nail which is shocking being in a barn in Wisconsin
odds are this will be going .060 and acquiring a stroker crank we have one that's 340 based 422ci yet to be started but will probably build another one with a bit bigger cam than the last one since this one will have a ln A833 behind it rather than an auto BUT these cylinder walls have minimal rust and I mean barely any to.catch with finger nail which is shocking being in a barn in Wisconsin