DusterKrazy
Well-Known Member
Anybody built up a 400 that is not a 451 or bigger?
I enquired to several piston makers. They make anytihng you want for about a $1,000.
The IC825 from Keith Black will make it happen. It will be .045" in the hole at TDC with the 440 rod and 3.380 400 stroke and is made for the 4.342" bore. That is a off the shelf piston for a 468 cube motor based off the 400. They are a forged piston. Summit has um for 471 bucks.
http://www.summitracing.com/parts/UEM-IC825-040/
The IC825 from Keith Black will make it happen. It will be .045" in the hole at TDC with the 440 rod and 3.380 400 stroke and is made for the 4.342" bore. That is a off the shelf piston for a 468 cube motor based off the 400. They are a forged piston. Summit has um for 471 bucks.
http://www.summitracing.com/parts/UEM-IC825-040/
I enquired to several piston makers. They make anytihng you want for about a $1,000.
ouch
No zero deck quench then but the price is right.
Got any shots of them?
Description? Flat top/domed?
Holy domeasses Batman! No way that'll run on pump gas. lol
I know this is an old post, but very interesting to me. I’d like to try a 400 with a long rod. What’s the big advantages to this besides fitment and maybe lower and mid rpm response? Always a student...
Nice, but not interested in a stroker. I’d just do a 451 if so. 2800 lb A body... Thanks.