66Dvert
Working on my custom car parts again!
whew just now getting going on the dart. After collecting some parts to put my rust bucket back together (hey THANKS WAGGIN and all the others that I was able to get parts from
) I mean it was a mess,When I forst got it (cheap) it didn't look so bad, it ran,stopped and the top worked, or the frame went up and down anyway. the more I tore into it the worse it looked. I just about went ahead and scrapped it , but the rockers and front end looked great and it pissed me off that I was going to get rid of a car I liked. plans are
1. keepin it a slant (I have a 70challenger if I wanna go fast)
2. fix the rust (you'll see why it a rust bucket)
3. make it a driver but really nice!
4. electronic ignition and all the charging upgrades
5. disc conversion for the front and 4.5 on 5 bolt pattern all around
hmmm that should be enough to keep me busy for a long time. I usually get 2 weekends off a month and 1 of em's a honey do weekend, so
heres where I'm at now
got the old trunk pan cut out and will use some of the tirewell in the new trunk pan
whew I forgot how many spot welds there were in this thing
1. keepin it a slant (I have a 70challenger if I wanna go fast)
2. fix the rust (you'll see why it a rust bucket)
3. make it a driver but really nice!
4. electronic ignition and all the charging upgrades
5. disc conversion for the front and 4.5 on 5 bolt pattern all around
hmmm that should be enough to keep me busy for a long time. I usually get 2 weekends off a month and 1 of em's a honey do weekend, so
heres where I'm at now
got the old trunk pan cut out and will use some of the tirewell in the new trunk pan
whew I forgot how many spot welds there were in this thing