nm9stheham
Well-Known Member
There ya go! Who says this boy ain't an electrical expert?!? LOL
Done! Bad ground on the socket got a sharp pointed punch and dimpled it up between the socket and the housing! Thanks again to all that chimed in! Jim
Great!!!
You'd be far better off, however, on all 4 sockets...........to solder a pigtail to the socket shell and run it over to a bolted ground.
So I took another look at the 10 pin connector and sure enough, It matches the old harness, but not the new one. So, I pulled all the pins, matched by color according to the "real" manual and what do you know. Everything is working now except the flashers and one park light? Traced the flasher and definitely has power? So, all that being said, what the hell does this green light mean??