We can do EFI on the current roller 408. something to keep in mind. unless you've already stockpiled parts for the 390
I have a completely virgin 318 from 68 in my garage and I'm huge on 318s.....even if it's stroked! It WILL either be the stroker or a gen 3..... This goes back and forth in my head every few weeks..... I love driving my 'Cuda.....so the Gen 3 kinda sounds more appealing. .... Jeff
Did some searching. ...found this picture of a 68 Cuda with a Gen 3 Hemi. .... Yes...it's a Gen 3! Here's a link https://ratpatrol1.wordpress.com/2014/06/23/fishing-for-more-the-story-of-a-gen-3-hemi-barracuda/ Wow....I could live with that! !! Jeff
6.1 gen 3 into a 72/Demon is the title of a build thread I started on all the trials and tribulations of EFI merging with old car. Is it a total PITA? You bet, will I do it again? Most certainly! It is a hoot! Thanks Johnny for all you and Blueprint do for Mopar.
Just want to thank you guys for the support on this project. Hit some Delays with COVID19...but really pushing to try to get it back on track. I'll do everything I can to get these out, even if I have to buy the first one.
same basic idea as this https://blueprintengines.com/produc...-dressed-longblock-fuel-injection-psls4272ctf
Kinda doubt you’d need to buy the 1st one what’s the time line look like these days. Everything is slipping.
If you have an engine ready to go by then I’ll be first in line to get everything you have to put a gen3 hemi into my car!
I would be interested as well. A 100% turn key option is where it is at as i did a 5.7 Hemi swap in a 70 Dart and found that what held me back was all the "little things" that I either did not know about, did not have, overlooked, or just could not afford at that time. I tend to be a finance the build kinda guy, so once the car is done being paid for, i would definitely jump on financing a complete package. Would you offer a shop/commercial or a police/military discount?
We do have a military discount. reseller accounts are usually pretty high volume, but we can look. thanks for the interest for sure!
Any updates on turn key 392 availability? I have a 67 Dart getting started mid January. Currently 360 mopar crate motor and refreshed 727 will be going in with gear vendors overdrive unit. Control freak front and rear wont be done until mid February, so i have about a month to decide engine and transmission options. I am looking at power steering,power brakes,and air conditioning pulley systems and fuel injection. I already have a 440 swapped 64 Dart that is a handful, so this is more of a restomod driver. Any chance 392 is still in the works?
Appreciate your interest in us! It's not permanently shelved, but definitely slow going with covid. I don't believe we would meet your timeline.
6.1 Hemi in my ‘69 Barracuda. https://www.hemmings.com/stories/article/modernized-mopar-1969-plymouth-barracuda Jim
