Did the 340 ever come from the factory with an aluminium intake ?

-
hello jerry, if you are asking strick factory intake manfolds ,answer is, from 1968 ,to 1973 340's are all cast iron. by the way , your dart looks great!
 
273plusfifty said:
hello jerry, if you are asking strick factory intake manfolds ,answer is, from 1968 ,to 1973 340's are all cast iron. by the way , your dart looks great!
Click to expand...
From 10 feet yes , it's a daily driver in summer , on nice days , no driving in the rain .
Thanks
 
Edelbrock LD340 intake was sold through Chrysler performance parts. It had a Chrysler number. Just like how today you can buy MP parts with MP part numbers that are just repackaged parts from aftermarket suppliers.

Many sellers now of those LD340 intakes try to get everyone excited with: half-truths, folklore, wives tales, and general BS to suck more money out of them.

Edelbrock RPM is proven to be virtually identical on the dyno.
 
jerry6 said:
I remember seeing the Chrysler emblem on an alu intake , must have been an over the counter intake , not a factory installed intake .
Thanks
Click to expand...

The symbol for Chrysler and Plymouth back then was a blue pentastar, Dodge was a red one. If it was just cast in a part that was 'natural' in color, it could stand for either...
 
273plusfifty said:
hello jerry, if you are asking strick factory intake manfolds ,answer is, from 1968 ,to 1973 340's are all cast iron. by the way , your dart looks great!
Click to expand...

Except the 6 pack.

autoxcuda said:
Edelbrock LD340 intake was sold through Chrysler performance parts. It had a Chrysler number. Just like how today you can buy MP parts with MP part numbers that are just repackaged parts from aftermarket suppliers.

Many sellers now of those LD340 intakes try to get everyone excited with: half-truths, folklore, wives tales, and general BS to suck more money out of them.

Edelbrock RPM is proven to be virtually identical on the dyno.
Click to expand...

LOL, well, maybe just a little better!
 
[ame="http://www.ebay.com/itm/Mopar-340-intake-manifold-LD340-NOS-Rare-Chrysler-3549884-/151361925383?pt=Motors_Car_Truck_Parts_Accessories&hash=item233ddfb107&vxp=mtr"]Mopar 340 Intake Manifold LD340 RARE Chrysler 3549884 | eBay[/ame]

I am sure this one will run the fastest on any 340....
 
Then I should be able to get more from the serious engine builder.
All the direct connection mods made to have a rip roaring engine!
LMAO!

What a crack smoker that guy is!
 
$_57.JPG
70aarcuda said:
http://www.ebay.com/itm/Mopar-340-i...Parts_Accessories&hash=item233ddfb107&vxp=mtr

I am sure this one will run the fastest on any 340....
Click to expand...
Some people ! It's nice , but 1000 !!!
 
EL5DEMON340 said:
Yep the best factory stock 340 intake, to bad there wasn't a factory aluminum intake for the 4bbl
Click to expand...

I remember hearing about a local Super Stock? Pink Challenger T/A that converted the car to a 71 340 TQ and intake setup because the car made more power and went faster.
 
autoxcuda said:
I remember hearing about a local Super Stock? Pink Challenger T/A that converted the car to a 71 340 TQ and intake setup because the car made more power and went faster.
Click to expand...

It was actually a Stocker....and probably cause the 71 TQ motor was factored less then the 70 6 pac motor....

trying to remember his name...there was a woman that drove the car at 1st....

last name is like Buell...
 
Gene Buell, Hesperia, Calif., '70 Challenger, C/SA, 10.596 seconds, -1.394 (under index)

that would have been with a 6 pac....
 
Locally a guy running a 70 AARcuda in stock has changed the car to a 71 Cuda with TQ....
 
70aarcuda said:
It was actually a Stocker....and probably cause the 71 TQ motor was factored less then the 70 6 pac motor....

trying to remember his name...there was a woman that drove the car at 1st....

last name is like Buell...
Click to expand...

Yes. Woman drove car then. Used to bring it to spring fling.

Troy at Westoaks was suppying them with MP stuff when they made the switchover. The 6-pack intake and carb alone did not make the power of the 71 tq setup.

I'll ask Troy for more details. Don't think I have Gene's email.
 
autoxcuda said:
I wonder if that was the one crackedback sold a few years ago at a Spring/Fall Fling. IIRC, it was around $300 +/-$75 or so.
Click to expand...

It might be. I remember the guy that bought it.

IMO, that dude has some real fantasy land pricing. Used intakes for roughly the same base price as a new one... oh wait, then add in the shipping and it's way more than new/free ship from summit/jegs. Beyond stupid and looking for that one sucker. The intake IMO, is worth the same as a new air gap.
 

crackedback said:
It might be. I remember the guy that bought it.

IMO, that dude has some real fantasy land pricing. Used intakes for roughly the same base price as a new one... oh wait, then add in the shipping and it's way more than new/free ship from summit/jegs. Beyond stupid and looking for that one sucker. The intake IMO, is worth the same as a new air gap.
Click to expand...

It's Hemi George that in his Spring/Fall Fling swap spot has a couple restored woodgrain steering wheels, big block water pumps, a handcrafted wood carving or two. Drives in late at the back row in an early 70's Dart or Valiant.

Could be that's it changed hands since you sold it.
 
When I was in Pa. in at the mopar show in Carlisle ,saw many ld4b passed off as ld340,s priced at $300 ea. /many stock intakes painted were 175/200$/ a dirty one 2 doors down $50 .
 
autoxcuda said:
Yes. Woman drove car then. Used to bring it to spring fling.

Troy at Westoaks was suppying them with MP stuff when they made the switchover. The 6-pack intake and carb alone did not make the power of the 71 tq setup.

I'll ask Troy for more details. Don't think I have Gene's email.
Click to expand...

That could be back in the day, I know I've heard from a couple F.A.S.T. Sb guys that wish there was a 70/71 duster demon 6 pack factory car. I guess they "know" they would be faster.
 
You must log in or register to reply here.
-

Similar threads

67_Slimer
340 Steel Crank
2 3 4
Replies
79
Views
4K
CRUZE 418
CRUZE 418
B
Adjustable rocker arms identification
Replies
7
Views
436
ch1ll
C
ValiantKevin
This from the factory or?
Replies
16
Views
1K
Killer6
K
70SwingerGuy
Steering Wheel Question
Replies
3
Views
396
michiganpat
michiganpat
JoeDragster
Replacement intake manifold for 70 dart with factory 340 breather
Replies
7
Views
524
JoeDragster
JoeDragster
Back
Top Bottom