Fabrication Thread: What have you made?

[4mulaSvaliant]

Nice guys! Man thats a big A__ daffodil!

Slantscamp, Id like to see both of those run! That radio flyer looks like it may do wheel stands pretty easily! Sweet!

 

[slantscamp]

the radio flyer is getting wheelie bars. the way i have it geared. it should pull the wheels as long as you keep your foot in it. but eventually i want to see how fast i can get it to go. as for the slant, im still tuning it and working out a few bugs, but i took it to a local show a couple weeks ago and it drew a bit of a crowd.

 

[Demon416]

and my pride and joy. my blown slant six.

Now that's impressive!

 

[memike]

Some great things being dun here in this thread :cheers:

Me, well just a great way to get fresh air to our engines without cutting the hood if there is a clearance problem :toothy8:
This is a 93 Jeep 4.0 breather system that feeds cool fresh air to my little 170/6
No more 200 degree air for me :happy2:
I did use the original threaded holes for the battery tray.

Shade tree way, and it may not be much but I am proud of it :happy1:

 

[4mulaSvaliant]

Loved it when you did that Mike! Very cool idea!

 

[4mulaSvaliant]

Hey here is a blog I have started to keep track of all of my fabrication and use it as a sort of portfolio if you will. Check it out..... "follow" my blog while you are there!!!
Thanks all


http://4mulasvaliant.blogspot.com/

 

[rlevs]

sorry none of my stuff other than the jeeps is mopar
jeep cage

minch mount

r.t.i. ramp

 

[rlevs]

jeep dash

bronco Dash

jeep front bumper

bronco back bumper

 

[draginmopars]

While fabricating the cage, and everything else+, Since they make Nothing for the Rampage,
needed a set of headers for the Rampage

cross over the top, equal length,
can still remove valve cover,starter
easy to work around, Since there will be no passenger,
and to be different

 

[younggun2.0]

i have done more fab projects than i can count. here a few that i have pics of.

my trans cooler rack.

my coffee table

my lamp

the bed i built

my dash

my shifter

and my 50mph motorized bmx bike

[ame=http://i370.photobucket.com/albums/oo147/johnnydart_photo/motobmx021.mp4]

[/ame]

 

[CudaChick1968]

I didn't fab this up but Billy did. He made it out of some leftover crap -- oops I mean scrap -- metal laying around in the shop yesterday while I polished up a brand new trim tool (which, incidentally, will be the subject of my next Good Guy Alert :-D).

He's been looking at motorcycle lift table for awhile but they're pretty pricey!

The Billy Version, a free 10-foot long Shipping & Receiving Department table that started out as a larger version of my own workbench, with his front wheel support was maybe a total of 2 hours' time between gathering up the materials, marking his cut lines for the band saw, mocking and welding it all up ... at a grand total of $22.00 (because he ran out of mig wire midstream). I'm proud of his low-budget efforts! It doesn't lift like those high-dollar hydraulic units, but the ceiling cable hoist I use for my powder spray rack sure does ...

View attachment 002 - Copy.jpg

View attachment 003 - Copy.jpg

View attachment 004 - Copy.jpg

View attachment 005 - Copy.jpg

View attachment 006 - Copy.jpg

View attachment 007 - Copy.jpg

The whole point of building the table in the first place is an easy one to figure out. :-D

Ya'll probably remember the Honda dirt bike I powder coated??? Well, the rest of the pictures I took yesterday will be the "before" shots for the next PSC bike build thread. Those of you who watched my [ame="http://www.youtube.com/watch?v=BZRg3LIEuT8&feature=share"]YouTube Shop Introduction Movie[/ame] have already seen the bike in its as-traded form with the funky paint job, and heard it fire up for the first time (at time frame 7:11). It's DEFINITELY healthy and will easily run a 9-second quarter ... there's 8 feet of wheelie bar that goes with this bad boy that I already coated for him a few months ago.

Watch for something about a 1991 Suzuki GS1000E drag bike build with my handle on it coming soon! With 25 jobs here again [not to mention all the personal drama BS going on the last couple of months], between me and all of you this is about the last thing I need right now personally, but he's excited about it. "Stand By Your Man" an' all that ... :-D

 

[dvav]

i patched some big cracks in my dash pad and recovered with carbon fiber looking cloth .built the dash and 4 speed console with speakers from scratch

 

[johnparts]

My led tails

 

[johnparts]

Wiper delete

 

[johnparts]

4 link

 

[johnparts]

Hemi motor mounts

 

[johnparts]

Molded bumper

 

[evil 340]

bad ***. i ve been making lighted box signs lately to help fund my kids demon 340 build. if anyone is interested in one...pm me. i can have them made in any size you want, but my standard size is 20"x 15".

 

[CudaChick1968]

bad ***. i ve been making lighted box signs lately to help fund my kids demon 340 build. if anyone is interested in one...pm me. i can have them made in any size you want, but my standard size is 20"x 15".

And they're really nice too evil 340. :-D Thanks again!!!

 

[southerneagle]

Animatronic wolf for my haunted house.

 

[southerneagle]

Alien head for a sifi trophy wall.

 

[evil 340]

Thanks cudachick. Glad u like it.


Very cool alien and hound. That was my dream job as a kid.........designing monsters

 

[southerneagle]

It's a fun hobbie, I should finish molding the Raptor tomorrow and I'll post some pics.

 

[evil 340]

i made a couple different signs this weekend

 

[sireland67]

I am really digging the rapid transit round sign.
I have the same plate on the front of my truck.