zigs
Well-Known Member
Anybody use these . Add says for 70 Duster 318, 340 360. Will fit other year small block abodies.$196 shipped
I'm a ways off just looking came across these . Only thing I didn't like is the flange looked too thin.I don't know anything about that brand, but I can tell you from experience, every time I've bought cheap headers I had problems. Leaks, crooked flanges, plug access, fitment, durability... you name it. I gave up on cheap headers about 15 years ago, now I just bite the bullet and pay for the good stuff. Best of luck to you whichever way you go.
I was thinking they looked like the old school cheapies I took out of my car. Expensive one's going in.The flange doesnt look that thin, but the driver side looks like it would hang low like the rest of the cheapos.
I don't like the idea of beating in an $800 pair of headers. For that money they should fit without problems. I've read probably 100 threads on here about brands and fitment. Some people say TTI or Dougs are the best and others say they don't work, others say cheap work and other people say cheap don't work. I understand every car is different but most of us are running same equipment , either manual or power steering , large or small starter ,V8 K frame or /6 with mod. 318, 340, 360 engines.
My build is a72 340 stock heads , manual steering with Borgeson knuckle mini starter /6 k with V8 mount adapters. Now if anyone has the same thing as me and has headers they installed with no problems I'd like to hear about it.
I have a pair waiting in the wings for my 318. TTI makes nice exhaust systems for them too. (which mine needs)I may end up going with stock manifolds. Looked at 68-70 340 manifolds their not cheap either but fit.
No matter what way I go the manifolds will be on before engine is placed in car. yellow rose on here cut his drivers side to thread it through the steering .By the way he lives close to me , met him a couple weeks ago , we had a good visit . Very knowledgeable person.Follow the engine location directions for the tti headers and they should fit without denting. God only knows what the guys who complained did to their install. I see all kinds of goofy user errors on the various forums in frequent
I may end up going with stock manifolds. Looked at 68-70 340 manifolds their not cheap either but fit.
Let me barrow them ……….. permanently .I have a pair waiting in the wings for my 318. TTI makes nice exhaust systems for them too. (which mine needs)
So joe do you get a kick back from TTI ? If not you should.I put the 340 manifolds on our dart and man the exhaust was a pain in the ***. My tti headers and exhaust were much easier. Tti headers have better plug access too. Not that the manifolds are horrible in that department.
So joe do you get a kick back from TTI ? If not you should.
Do they hang low?My Hookers went in with out any mods in my 340 dart with PS.
Where did you find these? Having a hard time finding this brand.Anybody use these . Add says for 70 Duster 318, 340 360. Will fit other year small block abodies.$196 shippedView attachment 1715407005
CR Concepts Ebay Item #283599273302Where did you find these? Having a hard time finding this brand.
Thank youCR Concepts Ebay Item #283599273302