Max Compression With Felpro Gaskets??

[SRT_DSTRHOLC]

What length pushrod does it say you need?

 

[Mad Dart]

What length pushrod does it say you need?

The exact measurement is 7.654, so I am going to order them at 7.650 Hardened for guide plates with oiling holes in them.

Pictures are posted on this thread.

http://www.forabodiesonly.com/mopar/showthread.php?t=78466

 

[SRT_DSTRHOLC]

with a solid cam? wth haha Thats what I used with a hydraulic cam. And I heard that solids use longer ones

 

[Mad Dart]

with a solid cam? wth haha Thats what I used with a hydraulic cam. And I heard that solids use longer ones

You got to remember I used a Bastard block that was decked wrong on one side so I had to take it down even on the other side and I milled the heads .020 to get to 58cc and then used a .054 compressed gasket. My pistons are out of the hole .016-.018.

 

[SRT_DSTRHOLC]

hmm.. Ill just have to measure

 

[Mad Dart]

hmm.. Ill just have to measure

You may be correct.