Need a proportional valve 75 dodge dart

[75dodgedart]

Posted a ad up sometime ago, **** happens, :banghead: :burnout:

Anyways,

Pulled out the slant/904 and did a overhaul, cleaned out the engine bay redid the wiring harness, floorpans , subframe work, car is Ready to be taken to the body shop, LAST THING I NEED IS A PROPORTIONAL VALVE, anyone got one for a 75 dodge dart 2 door hardtop, tried to rebuild it but that didn't go well as planned lol,FRONT DISK/REAR DRUM thank you and Mopar 4 life :burnout: :burnout: :burnout:

 

[slantsixdan]

Good selection of brand new ones at www.inlinetube.com .

 

[d5667]

Posted a ad up sometime ago, **** happens, :banghead: :burnout:

Anyways,

Pulled out the slant/904 and did a overhaul, cleaned out the engine bay redid the wiring harness, floorpans , subframe work, car is Ready to be taken to the body shop, LAST THING I NEED IS A PROPORTIONAL VALVE, anyone got one for a 75 dodge dart 2 door hardtop, tried to rebuild it but that didn't go well as planned lol,FRONT DISK/REAR DRUM thank you and Mopar 4 life :burnout: :burnout: :burnout:

What seems to be the problem?Did you just screw the valve up? reason I am asking is its not always a proportion valve fault.

 

[Ironmike]

I got mine from The Right Stuff. Good people to deal with, in my experience.

 

[70aarcuda]

just bought one from inline tube....installed it on tuesday...

 

[75dodgedart]

Again Thank you for the input, This is a 75 dodge Dart not a 74, or lower, already spoke to inline, and they do not have one for a 75, havent been having any luck finding one, anyone got a proportional valve for a 75 dodge dart, from a 75 parts car? anyone? send me a msg, thank you,

-Mopar 4 life,

Car is ready to roll into body shop after this, much help is appreciated,

 

[abodyjoe]

Again Thank you for the input, This is a 75 dodge Dart not a 74, or lower, already spoke to inline, and they do not have one for a 75, havent been having any luck finding one, anyone got a proportional valve for a 75 dodge dart, from a 75 parts car? anyone? send me a msg, thank you,

-Mopar 4 life,

Car is ready to roll into body shop after this, much help is appreciated,

really??? know for a fact we just ordered one from there for a 73 dart with disc/drum brakes. that should be the same as a 75 no?

 

[slantsixdan]

No, starting in '75 the A-bodies used a cast-iron proportioning (not "proportional") valve basically the same as the one used in the last few years of E-bodies (which Inline Tube does carry, their number VML-105, which would work). Or you could use their PR-100 universal item, or you could use their AJP-01 adjustable prop valve and their PR-104B holdoff valve.