rear brake line question

-
72ScampTramp

72ScampTramp

Scamp Tramp
Joined
Jan 13, 2009
Messages
4,406
Reaction score
174
Location
Fort Dodge Iowa
Ok now I just installed a Dana 60. In a 72 Scamp I working on brakes. I need the flex line that runs down to the distribution block with the vent bolt in it. I have the vent bolt and I have the distribution block. Do they make just a replacement for whats inbetween or do I have to buy one with a new block and everything?
 
most of the blocks i've seen the rear hose screws into it...then 2 outs...u night not need the vented bolt, just check if the dana has it's own vent like other rears...
 
see ive seen the ones that are all once peice. But I have the vent and the block. And yes the dana does have a vent hole. Just wondering if there was a screw in type to the distribution block
 
This is the only style im finding. I dont need the distrubition block on the end of that. That is the part that i have. I just need the hose. Now i Have a distribution block so that means somewhere out there someone makes just the hose.
 

Attachments

  • brake hose.jpg
    23.4 KB · Views: 141
The hose on top in the pic is for your front brakes.I,d buy a hose with the block already on it,one less place to leak and can be bolted down with the vent bolt.JMO
 
Problem is though scott. I already bent my lines for the wheels in the rear. So if they block is different it my lines may not fit.
 
You must log in or register to reply here.
-

Back
Top