Show us your small block

-
340 in my 70 Dart Swinger, a detail work in progress :)
20240520_172348.jpg
 
I notice you have first gen plugs in the firewall/cowl area. Did they come that way on your Australian Mopar? I added them to my 67 Barracuda just so I could clean the area behind them - they were full of pine straw.
Yes, those plugs were used in Aus Chryslers right up to the finish of production in 1981.
 

IMG_2224.jpg


408 Stroker that i purchased from here a while back, mocking up the motor mounts, next up I'm going to build an engine test stand, I want to fire it before it goes in the car.
 
Pump brand is Facet. No regulator and no issues so far. New mechanical pump failed after 2 months of usage so had to replace it.
 
Mine have been posted before elsewhere but here they are.

The 71 Demon 340 sporting his new Glen-Ray radiator for the 340.
20241002_204508.jpg


The avatar 72 Demon's 408.
20220721_204343.jpg
 
Just a little 318 with a cast 833OD I swapped into my '70 Swinger. Originally a slant and 904.
Engine (from '67 Coronet) and trans came from Jamie of Dead Dodge Garage. Cleaned em up a bit, painted, and she's about ready to rock! (Old pic, all accessories and radiator are installed now)

20240908_153022.jpg
 
-
Back
Top Bottom