Stop in for a cup of coffee

-
dukeboy_318 said:
So apparently a trailer came off the vehicle towing it and went off the road and into my neighbor's garage. So that was the big crash I heard about 230 this morning.
Click to expand...

You need to tighten the hitch to the ball.... :rolleyes:
 
Tooljunkie said:
So thankful for this warmer weather, want to move a few things around, to gain access to my metal working tools. Soon i get to start on bashing some metal. Try running my fenders through the english wheel and work the kinks out.
Click to expand...
You ever see the metal shaping Peter Tommasini does and teaches?
Peter Tommasini
 
71340Duster said:
That tester looks pretty useful, C4166 or whatever, bet you either have one or have seen it. I also like the meter with the Mopar logo on it, tach etc., pretty cool. I thought the FCC warning for metal leads was pretty interesting. While working in a Motorola shop that supported a lot of public safety radio equipment my co-workers got called upon to sniff out interference, ended up being a Winegard RV antenna.
Click to expand...
Had a few of them Karl has one now!
 
Morning all!! A little snow dusting over night. Cold 30's next couple days then 80 on Friday...when we land in Miami!! :thumbsup:
 
Morning all, we only get up to 70 this weekend. 3 inches of snow on the ground and more this afternoon.
 
It's Wagon Wednesday!
Good morning. :D

wagonwednesdayII.jpg
 
It would probably be bordering on hot here if it weren't for the 20-25mph North winds. 2 more days of that the experts say. I think a trip to the next valley may be on the agenda today. Bonnie Raitt will be at the casino late March, tickets to be had. :D
 
Trailer tires suck. Built an adapter for tire machine to hold wheel but the arm wont swing over enough to reach rim. I just change them with bars. Beats using vise, as it is too high on the bench.
 
Tooljunkie said:
Trailer tires suck. Built an adapter for tire machine to hold wheel but the arm wont swing over enough to reach rim. I just change them with bars. Beats using vise, as it is too high on the bench.
Click to expand...
I should get front tires for my mower soon. 8inch wheel. Probably put them on myself. Havent done any in a while. Should be fun...
 
zkx14 said:
I should get front tires for my mower soon. 8inch wheel. Probably put them on myself. Havent done any in a while. Should be fun...
Click to expand...
Should have made a how-to video. Off is easy, first side on is easy. Then clamp a vise grip to rim and bar the second side on.the vise grip is the ticket! I started using that about a year ago, wish i discovered it sooner.
 
Well my little project is done except for switching out the outlet plate when it arrives. (Thanks Tim)
It works great.

20200129_112352.jpg


20200129_124335.jpg


20200129_124342.jpg
 
My younger kid is interested in checking out a 67 Barracuda notch with a 440- 4 speed... :steering:

We'll have to see if he ends up getting it... :D
 
You must log in or register to reply here.
-

Back
Top