Stop in for a cup of coffee

[krazykuda]

So , It had hair around the hole ?

I prefer a trimmed bush....

[ame]https://youtu.be/Qvj4SS_MwMk[/ame]

 

[Mopar Tim]

a new hole to talk about! You guys need to get lucky.

 

[krazykuda]

a new hole to talk about! You guys need to get lucky.

Holes... Drains... Pipes.... What's the difference???

[ame]https://youtu.be/dOlGMPE68Bo[/ame]

 

[ScampMike]

it was just too easy...

a new hole to talk about! You guys need to get lucky.

 

[Mopar Tim]

Well i,m out of here, going to see how much that flush is going to cost.

 

[360DartGT66]

I've got a tentative apt. at the engine dyno for Wed. If that doesnt pan out then it may be either and evening apt. or a for sure apt. Monday. Any guesses where it will be sitting at?

360
XE268
9.5 SCR
Air Gap
TTI's
750 carb
magnum heads 65cc

I'll make a seriously uneducated guess.

420 hp @ 6200
475 tq @ 3800

 

[360DartGT66]

Change of subject, My mother in law just flushed a hearing aid down the john. 4500 EACH hearing aids! CRAP

No fun at all. Even if you do find it, chances are pretty bad for the electronics to survive.

 

[ScampMike]

good luck with it

Well i,m out of here, going to see how much that flush is going to cost.

 

[ScampMike]

hey - how come I can't find that question from SLS? what the heck..

I'll make a seriously uneducated guess.

420 hp @ 6200
475 tq @ 3800

 

[360DartGT66]

hey - how come I can't find that question from SLS? what the heck..

Here you go:
http://www.forabodiesonly.com/mopar/showpost.php?p=1971171298&postcount=38030

 

[ScampMike]

when all is said and done - right between the fenders.. hehehehe... it's a warm build, non-stroker with possibly a little too much carb... I'm thinking somewhere around 1 HP per cube..maybe on the slightly high side of that... and it wouldn't surprise me if you find you get better early #'s with a smaller carb..

I've got a tentative apt. at the engine dyno for Wed. If that doesnt pan out then it may be either and evening apt. or a for sure apt. Monday. Any guesses where it will be sitting at?

360
XE268
9.5 SCR
Air Gap
TTI's
750 carb
magnum heads 65cc

 

[ScampMike]

thank you!

Here you go:
http://www.forabodiesonly.com/mopar/showpost.php?p=1971171298&postcount=38030

 

[straightlinespeed]

hey - how come I can't find that question from SLS? what the heck..

Because you guys were talking about who could bottom out in the hole first... I stayed out of that conversation because there is no way I can bottom out.. LOL

 

[straightlinespeed]

when all is said and done - right between the fenders.. hehehehe... it's a warm build, non-stroker with possibly a little too much carb... I'm thinking somewhere around 1 HP per cube..maybe on the slightly high side of that... and it wouldn't surprise me if you find you get better early #'s with a smaller carb..

The beauty of it.. The shop has multiple size carbs to play around with. So it will be interesting..

I can tell you I hope its a whole lot more than the POS I took out.. If I remember correctly that came in at 242hp.

 

[ScampMike]

yea, a lot easier to explore the possible right way to go when you don't have to buy 6 different carbs.. that alone will be worth the $$ - I have no doubt you'll destroy the 242 mark..

The beauty of it.. The shop has multiple size carbs to play around with. So it will be interesting..

I can tell you I hope its a whole lot more than the POS I took out.. If I remember correctly that came in at 242hp.

 

[ScampMike]

it's all about the depth of the hole and the size of the bolt you're putting in it..

Because you guys were talking about who could bottom out in the hole first... I stayed out of that conversation because there is no way I can bottom out.. LOL

 

[No name needed]

Because you guys were talking about who could bottom out in the hole first... I stayed out of that conversation because there is no way I can bottom out.. LOL

Just be glad golf has not been a subject of discussion . The comments would be endlessops:

 

[ScampMike]

LOL - I came SO close to saying something about a hole in one...

Just be glad golf has not been a subject of discussion . The comments would be endlessops:

 

[zkx14]

I am really missing that 2nd coffee now. One ain't enough. Between that and the time change...

:sleepy2:

 

[Mopar Tim]

For those who care, that flush cost me 450.00 dollars. beats the heck out of full price!

 

[360DartGT66]

That must have been a relief!

 

[MOPARMITCH]

For those who care, that flush cost me 450.00 dollars. beats the heck out of full price!

Man !! Thats the Price of a nice new Carburetor !

 

[Princess Valiant]

just saw this on facebook and 99.9% of the time I ignore the pics involving women but this just scream Mr. BenRick

I think he is into everything in this pic LOL

He is not the only one who likes Dart sports and that is why he is one cool cat

 

[MOPARMITCH]

Hey !! That looks like my Wife !!

 

[zkx14]

Rani,
Nice of you to think of mr rick.

Got a question for you. As mopar museum curator... What stripe(s) would have been available on a 75 slant Duster?