Stop in for a cup of coffee

-
GeorgeH said:
Good here. you? How was Nam?
Click to expand...
Gonna be putting this 383 back together, and in the car this month. Then I want to run the bugs out of it. Then bring, or talk to you about the Quarters...And other Rust...LOL
 
So say you have slow/poor DSL. Most think Why not raise the speed? That actually has the opposite effect. Say you have a DSL circuit that is capped, throttled, at 10MPS. A good speed for DSL. Now we check the circuit and Max attainable speed is 12MPS. That circuit is running 99 percent. Not good. The reason is packet loss. EVERY digital circuit experiences packet loss. To make a usable connection, the lost packets need to be replaced. Those lost packets are automatically replaced using the overhead bandwidth, in this case in the one percent not used by the primary info. Not a good scenario. That circuit will be problematic. Same circuit but now it is capped at 5MPS, usually 6MPS but I will use 5 for conversation. Now the Capacity is only 50 percent. Much more stable because it has plenty of overhead room to replace the lost packets.
 
Mopar Tim said:
So say you have slow/poor DSL. Most think Why not raise the speed? That actually has the opposite effect. Say you have a DSL circuit that is capped, throttled, at 10MPS. A good speed for DSL. Now we check the circuit and Max attainable speed is 12MPS. That circuit is running 99 percent. Not good. The reason is packet loss. EVERY digital circuit experiences packet loss. To make a usable connection, the lost packets need to be replaced. Those lost packets are automatically replaced using the overhead bandwidth, in this case in the one percent not used by the primary info. Not a good scenario. That circuit will be problematic. Same circuit but now it is capped at 5MPS, usually 6MPS but I will use 5 for conversation. Now the Capacity is only 50 percent. Much more stable because it has plenty of overhead room to replace the lost packets.
Click to expand...
And you get too many lost, un recovered packets, the circuit falls out of "SYNC", and tries to reset. On restart, the packet loss is zero again, and it starts all over again. You get these un recovered packets because there is no room to replace them.... Packet loss can be in the millions and still stay in "SYNC". But just a few, in the hundreds, un recovered loss, circuit fails.
 
First time driving this today since i bought it for 7 benjamins the other week.
Runs good.

IMG_20171202_120633.jpg


IMG_20171202_120652.jpg


IMG_20171202_120608.jpg
 

Old man ray said:
Six. I didn't even open the hood to be honest. Just had no interest. I will check into it further for you if you want.
Click to expand...
Could you get a couple pictures of the lower windshield molding? The corners? If you get a chance...
 
Mopar Tim said:
Could you get a couple pictures of the lower windshield molding? The corners? If you get a chance...
Click to expand...
If I remember some of it was missing. But I could be mistaken.
He has a 70SS bigblock Cheville there gold edition. I never knew they even made a gold addition.
 
Degreased the 340 intake and tossed it into the bead blast cabinet. Compressor needs a little break. Its coming along nicely. Paint left on it blows off easy.
Picture later.
 
Mopar Tim said:
So say you have slow/poor DSL. Most think Why not raise the speed? That actually has the opposite effect. Say you have a DSL circuit that is capped, throttled, at 10MPS. A good speed for DSL. Now we check the circuit and Max attainable speed is 12MPS. That circuit is running 99 percent. Not good. The reason is packet loss. EVERY digital circuit experiences packet loss. To make a usable connection, the lost packets need to be replaced. Those lost packets are automatically replaced using the overhead bandwidth, in this case in the one percent not used by the primary info. Not a good scenario. That circuit will be problematic. Same circuit but now it is capped at 5MPS, usually 6MPS but I will use 5 for conversation. Now the Capacity is only 50 percent. Much more stable because it has plenty of overhead room to replace the lost packets.
Click to expand...
Confused...
Max vs capped? Who controls that? And how does this relate to me trying to maximize my wiring?
 
You must log in or register to reply here.
-

Similar threads

E
ESPO Springs n Things
Replies
16
Views
402
RustyRatRod
RustyRatRod
ocdart
Bye, bye Parnelli...there's a spot on the front row waiting for you
Replies
12
Views
752
Chargervert
C
Johnny Mac
Stop in and see BluePrint Engines at Carlisle 2025! First time attending! Show Specials :)
Replies
8
Views
731
Johnny Mac
Johnny Mac
340six
Interested in a different type of build thread
Replies
3
Views
263
340six
340six
HawkRod
2025 Carlisle FxBO Tent Luncheon
2
Replies
26
Views
2K
Kern Dog
Kern Dog
Back
Top Bottom