Sixth year for me, vending. I only go to Drink Beer and Smoke Cigars , and watch the women pass by.....
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
Its on the hoist,so no problem.
Connectors look home made. Each one is 3 pieces.
Im going to drill a few holes to check the welds on the 3 pieces.
From what i found so far is “lazy”
Seems to be the build theme so far.
Connectors look home made. Each one is 3 pieces.
Im going to drill a few holes to check the welds on the 3 pieces.
From what i found so far is “lazy”
Seems to be the build theme so far.
And guys with parrots! That **** was funny!I only go to Drink Beer and Smoke Cigars , and watch the women pass by.....
Well if they wore condoms, they wouldn’t have to pull out
- Joined
- Mar 17, 2018
- Messages
- 17,153
- Reaction score
- 41,895
We are in the midst of a serious snow storm. 50 mph winds by noon. They are predicting interstate gates down. Wife wants to postpone trip to WPG. Let me know next time you go and we will make up some kind of excuse to go. You are right it is a hoot to sort out a face and a name with the FABO guys.
straightlinespeed
Sometimes I pretend to be normal
Morning Gents
Or scary....
send it my way!!
Morning at work?? School is probably pretty empty this time of year??
Yuck!! I could go ALL winter and be HAPPY if I didn't see S....won't even print that word on my PC!!
Mattax
Just the facts, ma'am
I agree with Ray. Most were made to be attached front and rear only.
Like he said a couple companies make them to be fitted to the floor.
Race cars sometimes will put them through the floor pan - not allowed on a lot of road race classes.
Early B-cuda's are pretty stuctural to begin with so less to be gained by joining the length of the floor.
On the mid gens, got to leave room for the e-brake cable and fuel line, or reroute. With the early gen like you have IDK.
What I'll be doing my frame connectors when I replace them is add a third attachment point that will bolt in at the front seat belt mount. It goes right into a small angle brace on the inside of the rocker. See what you may have there. The classes I run autocross in only allow a bolt in for the third attachment point.
Good morning everyone. 37 and raining here. Supposed to rain all day. Going to spend most of the day in the shop again with my son working on his rat rod. Made good progress yesterday, need to keep on it. Goal is for him to drive it to school his senior year (fall 2019).
zkx14
Duster De-ruster
He thinks he's hotPoor Ben no present this year and still cold.
I will be there. What days and what car to bring is TBD. Also whether or not I drag any parts along
I sometimes walk rows in opposite direction and see completely different stuff
I had a couple of somebody's beers Friday, but I do more Gatorade and water than alcohol. I know Wolfie had a bottle of something good.
Only had 1 on Saturday - from brewmaster TMM
zkx14
Duster De-ruster
Good Morning
Well. Carlisle reservations paid hehe those odds just went down
zkx14
Duster De-ruster
uh, huh...Depends is my brand. I have the mopar ones, great coverage front and rear. Saves trips to the potty at Carlisle and don't have to pay the attendant! Think the usa tool one have to be welded?
I want to come!
Mattax
Just the facts, ma'am
G'morning Tim!
headed out myself...catch ya later.
zkx14
Duster De-ruster
hey
Hey
Your staying on base??
lilfontleroy
annoyinglilLeroy
I saw hey 3 times and thought you were talking about me
Got to drive my brothers Demon. Jesus what a crazy ride! And christmas day wrenching on the 67 dart, got all wheels back on the ground, no brakes but I can put it on a trailer to haul back home..
-
Similar threads
