Guess I have to do my annual Fastenal run today and order a bunch of smalls for distrib rebuilding, should be interesting my normal guy left and I switched stores, some hard to find stuff he was able to get in for me.
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
ours here is by appointment only again... we're rolling backwards
the odd stuff they tried back then
Morning! minus frickin seven this morning.
64°F
So after no rain since early August thru September and most of October, we just got over 2 inches of rain yesterday with more coming this week
So I’m thinking out loud here. But if a certain party wins, they’ve pledged to even tax 401k savings. Upwards of 36 percent annually. With that said, if they do win, would it not be a good decision to pull Part of my 401k, take the 20 percent tax hit and the 10 percent penalty one time, and invest it in some real estate? Either way, I lose money, either 36 percent every year or 30 percent once. But real estate, especially land, will gain value as they can’t make more of it.
Unconventional
Well-Known Member
It's ThirtyTwosday!
Good morning
Good morning
You should send one to Dave Ddaddy
hell, i'll do you one better. @halifaxhops I'll pay ya for Dave's. just to be a good guy
zkx14
Duster De-ruster
Happy Tuesday.
Good Morning Mopar Manipulators !!!
Got a late start today. Going to figure out and install the quarter regulators and windows today. I am ready for the rear window also, since I have the new gasket . Anyone install one themselves ? I put a phone call in to my glass guy but got no response. I get tired of waiting on guys. Just like this Vinyl top and headliner. I think I saw where Keith did his a while back. I have seen where the nylon rope trick works pretty good. So maybe I look around for some small cord today. But of course I will need another man to help push the glass from outside....
Got a late start today. Going to figure out and install the quarter regulators and windows today. I am ready for the rear window also, since I have the new gasket . Anyone install one themselves ? I put a phone call in to my glass guy but got no response. I get tired of waiting on guys. Just like this Vinyl top and headliner. I think I saw where Keith did his a while back. I have seen where the nylon rope trick works pretty good. So maybe I look around for some small cord today. But of course I will need another man to help push the glass from outside....
Some one shoot me his address.
Just tell me when! Lube it up good with dish soap helps a lot.
Well might have fell into something again. Stopped by a military surpluss warehouse that opened a year ago, told them I do distributors. Sent me to the main office and they are sending me a list of all Mopar numbers they have. Holy crap Tim this place makes Mark look small!
I used building twine. but as Hoppy said have it lubed up good
I got some Vasoline.....with that work ????
Palmolive works great also!
Ford escape just showed up for an engine. Lined a used one up, guess im going for it today.
zkx14
Duster De-ruster
I'm assuming that will be like Hoppy's. No filler cord on the outside like mine(completely different...
.) I think we put his gasket on the glass first with no sealer. Then put rope caulk in the outer groove and ran the rope around that. IIRC we wrapped it so the ends were in the bottom center. So you pull rope from inside the car as someone puts pressure on the outside of glass. Putting the more difficult bottom corners in first. As for lub, I actually like Windex. Not as good as far as letting it slide, but will evaporate completely and not leave a soaf or oil residue that would prevent you from adding any sealer if it leaked.
.) I think we put his gasket on the glass first with no sealer. Then put rope caulk in the outer groove and ran the rope around that. IIRC we wrapped it so the ends were in the bottom center. So you pull rope from inside the car as someone puts pressure on the outside of glass. Putting the more difficult bottom corners in first. As for lub, I actually like Windex. Not as good as far as letting it slide, but will evaporate completely and not leave a soaf or oil residue that would prevent you from adding any sealer if it leaked. -
Similar threads
