Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
Evening all. Things are getting stupid here at work.
Unconventional
Well-Known Member
Harlands are crazy money
MomsDuster
Well-Known Member
Chris @dukeboy_318 these are what Mike sold me. Said they were a great choice for my budget. PRW Industries 3244012 Performance Quotient PQx Platinum Series Shaft-Mount Rocker Arms | Summit Racing
Perfect! Thanks. I just added the 1.5 version to my cart. Do you know, are they needle bearings or bushings?
- Joined
- Mar 17, 2018
- Messages
- 17,153
- Reaction score
- 41,896
Well one of our grandsons has just mastered peeing standing up. I don’t think he is quite three yet. While in and of itself not a remarkable achievement by any means, unless of course you count his now sudden grim focus and determination to pee on the cat in the house or out!
I like the looks of those. They look like Comps or the Speedmasters. I bought a set of Speedmasters but they are a bit rough looking construction wise. Copies I'm sure.
MomsDuster
Well-Known Member
Bushed
Sold! Thanks. You’re running a flat tappet too right?
MomsDuster
Well-Known Member
Yep comp xe275hl mine have different hold downs due to the b3 kit.
Last edited:
Is that what they was talking about in the thread I started? Something about geometry. Can’t believe that’s all that would be needed to correct it
Raise the bar! LOL
Unconventional
Well-Known Member
zkx14
Duster De-ruster
Yep. Sure is…
MomsDuster
Well-Known Member
He machines the shaft and there are aluminum inserts underneath that move the shaft up and in towards the top of the head.
Just sayin'
Hmm wonder what the benefits are
Went out and did a little more on the truck, have to add wiring for nss and backup light. I had a switch on dash, so thats easy.i will leave switch so i can turn light on if i want.
It's all about the rocker tip sweep in the valve stem. If everything is right the roller swipes the valve tip in the middle throughout the lift cycle.
MomsDuster
Well-Known Member
So a stability and durability purpose I assume?
And thanks, I tried to weed through all that on my thread but good heavens it was a dick measuring contest only it seemed they were all using the mm side of the ruler
Minimize side wear. Pushes straight down not pulling it against the valve guides.
-
Similar threads
