Stop in for a cup of coffee

[Unconventional]

Not much. Clean out the coal stove day I guess, think the pipe is almost blocked with light ash, usually twice a year thing.

Save that ash for the next time you pour concrete. Add a little to the mix and reduce the water added. Those big tall stacks on coal burnin' power plants is where the concrete industry gets Flyash used in concrete to increase the flowability of the concrete without using more water to do so.

 

[zkx14]

Save that ash for the next time you pour concrete. Add a little to the mix and reduce the water added. Those big tall stacks on coal burnin' power plants is where the concrete industry gets Flyash used in concrete to increase the flowability of the concrete without using more water to do so.

 

[Unconventional]

About .10" of rain this morning but the storm is almost past. Better than a poke in the eye with a sharp stick

 

[Unconventional]

View attachment 1715833443

"I paid for 5 yds of concrete! I'm not sending that last 1/4 yd back!"

 

[dukeboy440]

Hey this fiberglass has been curring for 5 days, should be nice and solid right, nope. Apparently I didn’t get enough hardener in it and just spilt the **** all over my hands. Fudge

 

[toolmanmike]

Hey this fiberglass has been curring for 5 days, should be nice and solid right, nope. Apparently I didn’t get enough hardener in it and just spilt the **** all over my hands. Fudge

Should have put some of this in!

 

[Mopar Tim]

Well, New controller did not fix issue. SO they are sending me a new speed sensor, and I am going to install the new harness.

 

[Mopar Tim]

Should have put some of this in!

View attachment 1715833479

That **** would get a dead man hard!!!

 

[zkx14]

Hey this fiberglass has been curring for 5 days, should be nice and solid right, nope. Apparently I didn’t get enough hardener in it and just spilt the **** all over my hands. Fudge

was the resin too old? Ambient temp too cold?

 

[Mopar Tim]

Well, out to the shop to pull GV harness....

 

[halifaxhops]

just back from Carlisle. Man on the hwy with the od on rpms are about 2000, take it off and 3100 rpm, have to love 3.91 gears!

 

[zkx14]

Should have put some of this in!

View attachment 1715833479

On a related note:
Just saw a commercial for Bentcarrot.com on the History channel. Most of it was carrots of various angularity floating around..

 

[halifaxhops]

was the resin too old? Ambient temp too cold?

Its Chris!

 

[Mopar Tim]

just back from Carlisle. Man on the hwy with the od on rpms are about 2000, take it off and 3100 rpm, have to love 3.91 gears!

How does it run?

 

[halifaxhops]

Like a caddilack. IM code is still not set yet!!!!!!! Most did just one to go. Pig on gas 13 on the hwy. Moves *** though.

 

[toolmanmike]

just back from Carlisle. Man on the hwy with the od on rpms are about 2000, take it off and 3100 rpm, have to love 3.91 gears!

And gotta live that pushbutton to turn it on and off.

 

[halifaxhops]

You can feel it for sure. Have to see how much OD that is?

 

[halifaxhops]

Hey Time my OD works!

 

[Mopar Tim]

Hey Time my OD works!

 

[halifaxhops]

Ah soo

46RE OD gear is .69:1

 

[Unconventional]

Ah soo

46RE OD gear is .69:1

Sounds bout right with a 30sum% reduction in RPM

 

[halifaxhops]

Never had one with a button before. Have the firechicken with a d4 not the same at all. Did have a Triumph stag V8 had a pushbutton split rear, that was cool!

 

[Mopar Tim]

Ah soo

46RE OD gear is .69:1

The GV is 78:1

 

[halifaxhops]

Nice!

 

[Mopar Tim]

Got clock today. Now to mail it ...