draginmopars
Well-Known Member
after pulling the 540 to put in the green dart
finally got to see if the 6 would fit
first changed the trans from a fixed yoke to a slip yoke
trans came out of an Airport Tug
Used the trans mount to locate the engine front to rear
eng/trans was moved back 12" in it's past life
Surprised how easy it went in
removed the p/s, vacuum pump, and A/c >> not needed
now just have to make motor mounts
then pull it back out
make some engine mods, clean everything up/ paint
finally got to see if the 6 would fit
![5-25-0420102_zpsldjugtaf.jpg](http://i267.photobucket.com/albums/ii313/draginmopars/white%20dart/satellite/5-25-0420102_zpsldjugtaf.jpg)
first changed the trans from a fixed yoke to a slip yoke
trans came out of an Airport Tug
![034_zpsymon3do3.jpg](http://i267.photobucket.com/albums/ii313/draginmopars/white%20dart/satellite/034_zpsymon3do3.jpg)
Used the trans mount to locate the engine front to rear
eng/trans was moved back 12" in it's past life
![053_zpsupk1y0f0.jpg](http://i267.photobucket.com/albums/ii313/draginmopars/white%20dart/satellite/053_zpsupk1y0f0.jpg)
Surprised how easy it went in
removed the p/s, vacuum pump, and A/c >> not needed
![057_zpsikawghg3.jpg](http://i267.photobucket.com/albums/ii313/draginmopars/white%20dart/satellite/057_zpsikawghg3.jpg)
![059_zps7nmivhzk.jpg](http://i267.photobucket.com/albums/ii313/draginmopars/white%20dart/satellite/059_zps7nmivhzk.jpg)
![058_zpsuqg0qjaw.jpg](http://i267.photobucket.com/albums/ii313/draginmopars/white%20dart/satellite/058_zpsuqg0qjaw.jpg)
now just have to make motor mounts
then pull it back out
make some engine mods, clean everything up/ paint
![060_zpsmvefwtko.jpg](http://i267.photobucket.com/albums/ii313/draginmopars/white%20dart/satellite/060_zpsmvefwtko.jpg)