SRT_DSTRHOLC
Well-Known Member
Whats needed to run 7psi max 5psi of boost on a 11.0 compression 360? less compression or lots of octane?
I was going to say the same thing.WAY less compression.
my dynamic compression is 8.5 and i believe my effective with 5psi of boost is 11-14 to 1 is that do able? We have 110 leaded that i already use to mix with 91 to make 95
I think you have it backwards, your static compression is your piston configured compression and your dynamic or theoretical compression is with your boost figured in. With an 8.5-1 piston you can easily run 5lbs boost. I have a smallblock all forged internals static comp 9-1 and run 14lbs boost full 35degrees timing. Before I ran an intercooler I also ran water/alky injection no ping on 93 octane, now with the intercooler I don't use the water/alky except in the summerhow has my CR changed? i have 11.0 compression static and 8.5 dynamic
the cam I have is a 306s magnum solid cam...306 advertised duration and 260 at 50
ya if i have to get new head gaskets again...ill get better one and thicker to lower compression at least to 10...the calculation on the octane isnt wrong from the calculator i used....12.6 gallons of 91 and 3.4 gallons of 110 is 95 http://www.bazellracefuels.com/Calcs/OC1.htm
Whats needed to run 7psi max 5psi of boost on a 11.0 compression 360? less compression or lots of octane?
how has my CR changed? i have 11.0 compression static and 8.5 dynamic
the cam I have is a 306s magnum solid cam...306 advertised duration and 260 at 50
Whats needed to run 7psi max 5psi of boost on a 11.0 compression 360? less compression or lots of octane?