Search results for query: *

  • Users: river rat
  • Content: Threads
  • Order by date
  1. river rat

    [SOLD] 1967 barracuda

    Listing my cuda for sale in the houston area. http://houston.craigslist.org/cto/4673896310.html
  2. river rat

    hard starting when warm

    My 67 barracuda starts fine when cold, but restarts after it warms up are a challenge. I have to hold down the throttle and try numerous cranks before she fires up. The motor is a 69 318,edelbrock intake, 600 cfm carb, small cam, stocks heads, hei ignition. Once fired, she runs ok. Any ideas?
  3. river rat

    [WANTED] Red sun visors

    Looking for red sun visors for my 67 barracuda, factory pp1 with white and red interior
  4. river rat

    lock cylinder

    So the other day when unlocking the passenger side door with my key, the cylinder came loose and wiggled out. Any idea how to secure it back in place?
  5. river rat

    mechanical advance

    How would i figure out how much advance the distibutor is set to? Do i simply remove the cap/rotor and look fir markings? I have a mopar electronic distributor with the chrome box
  6. river rat

    PS pump resevior

    Any tips on how to remove the PS resevior on a 67 TRW pump?
  7. river rat

    67 barracuda exhaust

    This exhaust is from Waldrons. it was on the cuda using stock 273 manifolds for only a few months. i will also include the manifolds if needed. asking 280 plus shipping
  8. river rat

    power steering pump

    Looking for a ps pump for a 67 v8 plymouth, i believe its the federal one with a reservior
  9. river rat

    only got half throttle

    I swapped a 4 bbl 318 in place of the original 2bbl 273, i used the original throttle cable and i am only getting about half throttle when the accelerator is mashed to the floor. Do i need a different cable from a factory 4bbl car?
  10. river rat

    smaller ps gearbox?

    Does anyone make a smaller ps gearbox for a 67 barracuda, or are the current remanuf ones any smaller?
  11. river rat

    spitfires or manifolds

    What's the opinion on spitfires vs manifolds? I already have a set of spitfires, just not sure its worth the hassle of installing. My car is a 67 cuda with a mild 318 with the usual bolt-ons and cam upgrade. thoughts?
  12. river rat

    Getting rid of 90 degree oil adapter

    Dont' really need the 90 degree oil filter adapter anymore and was thinking of ditching it. Anyone know a place i can find the plate and bolt needed to go directly onto the block?
  13. river rat

    engine swap question

    I just finished removing the tired old 273/2bl from my 67 cuda and installed a 69 block 318/4bl. Question is, in order to get the 318 lined up correctly and leveled, i had to use a taller motor mount on the passenger side. The 904 trans went into the crossmember just fine. Has anyone ran...
  14. river rat

    2bl to 4bl

    i'm going from 273 2bl to a 318 4bl and want to understand what is required from a throttle linkage perspective. I have the bracket already that goes on the back of the manifold, what else do i need? The new 318 has a eddy carb on it.
  15. river rat

    4bl air cleaner

    Looking for a factory 4bl air cleaner. Any year from 67+ will do.
  16. river rat

    painting engine

    Is there anything not so obvious to avoid getting paint on when painting the engine? I plan on painting the intake, block, heads, pan and water pump
  17. river rat

    Steering wheel issue

    If I grab the steering wheel and pull it towards me, it moves about 3/4 an inch and then i can push it back into place, almost like a telescoping effect. Other than that, it seems to work ok. This is for a 67 cuda with power steering. I am reading thru the service manual now, just thought...
  18. river rat

    strut bar removal

    The nut on the strut bar is crazy tight. Any tips on loosening the nut before I clamp the rod with vice grips to keep it from turning?
  19. river rat

    waldron exhaust

    I only found a few posts about this company. Anyone else heard and/or used them? http://waldronexhaust.com/cart/index.php?main_page=product_info&cPath=61_52_113&products_id=614
  20. river rat

    upper ball joint socket

    Anyone have a upper ball joint socket for a 67 barracuda they want to sale?
  21. river rat

    lca pivot shaft

    Anyone know the size of the lca pivot shaft nut on a 67 barracuda? It looks like at least 1"
  22. river rat

    idler arm bushings

    Rather than replace the entire idler arm on my 67 barracuda, i've seen some idler arm bushings kits. Has anyone just replaced the donut looking bushings on the idler arm?
  23. river rat

    lower control arms

    Besides the normal a-body ones, will any of the b-body lower control arms fit a 67 barracuda?
  24. river rat

    2012 charger srt-8

    http://www.autoblog.com/2011/02/09/2012-dodge-charger-srt8-chicago-2011/ I for one think this sedan is badass...but i'm sure folks will be critical of it before even driving one.
  25. river rat

    Houston trans shop

    Anybody have experience with a transmission shop in the Houston area? Looking to have the 904 rebuilt.
  26. river rat

    Original motor ?

    Anyone know where the VIN is stamped on the 273 engine block for a 67 barracuda? I want to verify if the engine is original or not.
  27. river rat

    Front end kit

    Anyone ever use this kit? http://cgi.ebay.com/ebaymotors/1967-1968-1969-BARRACUDA-FRONT-END-SUSPENSION-RBLD-KIT-_W0QQcmdZViewItemQQhashZitem564090345fQQitemZ370450379871QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories I know PST and others have been used with success, just wondering if the...
  28. river rat

    center drag link

    Getting ready to redo the front suspension on my 67 barracuda. Can anyone confirm that the center drag link for 67-72 A-bodies are the same?
  29. river rat

    new wheels

    got rid of the pizza cutters :cheers:
  30. river rat

    trunk mat

    Found quite a few vendors out there that make repro trunk mats. Does anyone have a specific one they'd recommend? Looking to replace the one in my 67 barracuda.
Back
Top