Search results for query: *

still have this tensioner?

you still have that pulley for sale?

Hey guys need some help, I have a 74 duster with air, recently swapped motors, switched power steering out to manual steering, keeping the air, did anything come factory like this? reason I ask is how do I run a fan belt now without the power steering pulley as a tensioner? thanks guys

thanks, pmd you

looking for door glass for 70-72 duster, price shipped to 56054 in minnesota? Thanks

I never use copper spray and I never reuse gaskets, why take the chance? new gaskets are cheap, for 75 bucks per head gasket I wouldn't even bother to chance it, I throw them on the scrap pile, and I had my heads off 4 time last summer

bore not boar, I have gone 4.200, was getting to the limit, I have heard 4.25 but threw a rod and wrecked the block before I got that far, what is the bore now? I have a brand new set of je nitrous pistons at 4.175 so if you are 4.180 or less they would work for you, 2.240 compression height...

I have fiberglass doors on my 74 dart sport, The doors are molded off of 70-72 dart/duster doors, so I bought all the regulators and cranks and all the **** I need out of some 72 duster doors, now my problem is I don't know where to put everything, I have to drill all the holes and fit...

I set the wheel tire combo in the wheel well where I want it and then I measure from center of tunnel to each rim and use those measurements, or just take off equal amounts and hope the offset is correct, I don't do it that way. the pinion yoke needs to be center in the tunnel

I agree, not worth ****, better off getting a set of edelbrocks complete, you will save money in the long run, save time, work and weight, and have a better head.

7538 team g for rb engine, brand new, never bolted on an engine, $250 shipped

18724365? are you serious with this firing order or making a joke?

interested in the buckets also, price and shipping to 56054, also all four tail lights and chrome trim, if they are good, and if you feel like cutting the entire rear tail section off of the quarters down to where it gets hidden behind the rear bumper and up to where it bends into the truck I...

how are the tail lights? and chrome trim?

only needs to be vented if it is in a sealed box, only needs to be in a sealed box if you don't have the proper firewall separating the trunk from the passenger compartment, a marine type plastic battery box is not NHRA legal, I wouldn't worry about venting it

pic of lifters = listed in my other add 800 holley spreadbore double pumper carb, I never used it but it is rebuilt $50 9" gears three sets, for some reason the last pic didnt work but it looks just like the other two pictured, one set 3.89 one set 4.86 and one set 5.13 $100 per set

afco double adjustable shocks use 12" springs 13.5-14" ride height 4" stroke $250 brand new A73LA6 schumacker mounts slant 6 to 340/360 $100 Nitrosaurus rex bottle heater/cooler $200 14"x6" K&N air filter $30 New 10-100 coil over springs $50 New 10-450 coil over springs $50 used 10-400...

I have done this, worked out well

tried them in my hoosiers, was less than impressed, have a bunch left over I will sell cheap if you want to try it

I don't see an issue, 1" of fillet weld will hold over 6 tons of force, these look to be welded on both sides, the mount will only see pulling and pushing force, no side to side or twisting, I would run them, if a person has enough power to think they can rip these mounts apart I would worry...

why not?

put the -10 back in, the hole is too big for the -8, run -10 to your pump

awesome! pic of grandpa with car? video would be better, car in my sig was bought brand new by my uncle, I bought it from him in 1988, and it will probably end up with one of my grandkids, cool story man

I will take the ar engineering brake kit if sale falls through

I have a 360 b&m flex plate, I will sell it to yo for 60 bucks shipped.

it was 1979, I was 7 years old, my uncle pulled up to the farm with it as I was helping dad unload the hay wagon, I am sure I seen the car before because my uncle had bought the car brand new, but this is the first memory I have of it, in april 1988 I gave him 1500 dollars and pulled it out of a...

good luck, purge the tubes, I used stainless so purging was a must but I also do it on mild steel just for a nicer finished product. I had $1500 into materials in the headers pictured above.

1 7/8 stepped to 2"

I have built a few set's. I have come to the conclusion that if someone makes them already, just buy them, I built my last set for my r5p7 motor in my dart, what a nightmare, but no one makes them so I had no choice

how much do you get for the bell and spacer?