Search results for query: *

I need a 1969 dart radiator 340 manual trans.

For sale axles for 8-3/4" rear from a 340 1969 Cuda with new bearings. This is for a 4 inch bolt pattern I replaced my 4-inch with a four and a half I don't need them anymore

I need drivers side motormount bracket for a 69, 340 cuda 4 spd.with ps. I believe it's 2.5 inches wide The block has 3 holes the pictures are of three wrong ones

I need a 340 dart drivers side motor mount bracket . Or does somebody have the plans to make one. I have plenty of steel

Important pictures of builds. As a first time Restorer I ran into many difficult decisions and there were not enough pictures of it. They were plenty of drawings from manuals but not enough actual photos which I find much more helpful. I find them helpful because you can zoom in and really...

As some of you know it requires exhaustive research to find where things should go. For example the last couple of weeks I had to search through posts, forums, books, internet, AMD, etc. To find simple solutions to my fuel, brake routing, installation of certain parts. I suggest that any thing...

I started my restoration 7 years ago... I finally got a chance to restart my restoration. I found these parts in my collection does anyone know where these get installed?

I'm installing the ham(aka pumpkin, 3rd member) I was going to do it the old fashioned way with a paper gasket and a few friends told me to use Permatex the right stuff and there is no need for the gasket.. Do any of you have a preference or suggestion? Your feedback is welcome..

Does anybody know of or have a resto manual for 1969 Dart Vert. I took it apart 7 years ago prior to my heart attack and bypass. Needless to say i forgot a lot DUH!!!

Does anybody know how to track down an old car or if it still exists or crushed. I sold it 35 years ago Vin RP23P2R286883.. Thanks in advance:prayer:

Here goes gang. I am a Staten Islander looking to retire outside of lib. Ny. tired of snow and need more space! As you, I like working on my cars and aiming south. Any suggestions?

I put some pictures of the inside of my 1969 dart convertible door. Prior to re-skinning it. I hope it helps.

I have 69 dart vert. I am rebuilding the front doors . There are what looks like plastic u channels in the window tracks and small white plastic "t" does anybody know where I can get those parts. Or what they are called.? please pm me.:coffee2:

I have a 1969 dart convertible. Does anyone know Where I can get all the parts to rebuild the door window parts (clips rollers),locks etc. Are there kits available ? Please send me a link.

I am installing a manual transmission into a 1969 dart convertible that was automatic. on the front drivers frame rail there is a plate that the Z bar connects to with the nylon rings. Does anybody have some nice photos of the plate area. I do Not want to weld it in the wrong place. and...

Has anybody here ever attempted to install the NEW dual clutch automatic transmission in a classic mopar?

I am about to pick the color to paint my 1969 340 4 Speed Convertible Dart... It is NOT factory original 8 cyl,4 speed. If anybody has any nice Ideas send me pix.. or the paint numbers etc.... Original interior is white.. you could look at my progress at www.dartmanclassic.com Thanks in...

I am installing 10 new studs in my 8 3/4 rear. The studs came from Mancini racing with copper washers. maybe yo c:violent1:an help. Do those washers go inside the banjo or outside under the stud's nuts.

This is a 7.25 rear end from a 1969 Dart vert. Complete rear If somone wants it come and get it $50. Staten Island NY...I really don't want to Scrap it.

Male Logic ​ , Critical Thinking At Its Best! W oman: Do you drink beer? Man: Yes Woman: How many beers a day? Man: Usually about 3 Woman: How much do you pay per beer? Man: $5.00 which includes a tip (This is where it gets scary !)...

I am about to rebuild my 340 motor. Several friends are suggesting find a reputable place to take it over and do it. It won't be my first. But it's been 35 years since my last. Does anybody have any recommendations in the NYC area?

I need the drip edge attached. It is a 1969 dart convertible. Does anybody know if a different vehicle's drip edge will fit or can be modified to fit? Thanks in advance:violent1:

Does anybody have this section for sale. Mine is rotted through. Does anybody know if this part interchangable with any other more readily available car? Any Ideas??

Does anybody know where to find repro or NOS of the white steering column slide clips and star nuts i am trying to avoid used ones. Please PM me..

I would like to rebuild the front end of my dart vert. Does anybody have suggestions about a good supplier that sells a kit? or your thoughts about coil over retrofit? I am building a driver not race car. Thanks in advance Phil

I need to replace the splash shields on my dart. They are available, however the driver's side is different from the passenger side.. The only ones I have seen look the same on both sides. Does anybody have info on this?

Does anybody know of a sheet metal assembly manual for a 1969 dart vert? They are out there for other vehicles but what about us? I am trying to avoid mistakes before I get to paint..

I need a steering column for a 1969 cuda Floor shifter(manual) Power steering.. PM me or Text/Call me ASAP 9173765016:coffee2:

I need the front driver's side frame rail for a 1969 dart. Close to the nyc area I would prefer to pick it up. Let me know price & location please.. PM me or call/text me 9173765016.

I put some pictures up here I hope you like them. I have more at www.dartmanclassic.com In case anybody needs to see the skeleton of their own project let me know I took hundreds of pix. This week I'll install the firewall, floor, dropdowns, frame rail, cross member.. Friendly Advise is...