Search results for query: *

'68-'73 Mopar 340 Short Block (Mopar: 2780930-340-1) Block is marked .030" over. includes; block, pistons, 2 sets of rods, cast crank, oil pump, windage tray, oil pan. Just never got started on it. Pick up in Pittsburg, CA. $1000 ~Sae

Any members out there have experience with the stock style sound deadener? Year One offers it as well as Summit and would like to hear real world opinions on it. I'm nearly ready to lay down carpet & would like a little sound/thermal insulation in the Swinger. I Don't have a need for full Butyl...

Had to sell the truck and have the Diablo Sport Predator tuner I was using for sale. U7137 for 4.7 V8 & 5.7 vehicles from 2003-2010. This unit is guranteed unlocked & ready to use on your truck. $160/obo plus shipping from CA 94565 Compatible with the following vehicles.

I bought a clutch style lsd from a member on a different sight who said it was for a 8.75 back in March of this year. Went to install the ring gear and though it seems like it wants to fit, the ring gear bolts wont seat completely due to the shoulder above the threads. Something to me seems...

looking for linkage bar for factory console, #21 in the below diagram for V8 (shown in Inset). Have all other linkage. Please PM. Jeff

Picked up a clutch type sure grip for my 8.75 a while back & just found out that the ring bolts from the open carrier I have wont work. Anyone have a set of ring bolts they don't need? Jeff

I've got a bare 360 block 4.00" bore with main caps - $100 Small Block A-727 trans w/ 18.5" tail housing. Unsure of history. Told by previous owner shifted fine, would advise inspection, selling as core - $150 Pick up in Pittsburg Ca Jeff

Decent set of hinge covers from the deluxe high back bench from a '73 Swinger in parchment. Crack in one does not impede the function. $20+ postage from CA 94545.

Anyone have a set of black front seat belts for a bucket set up? Im Sure I could mod my bench belts but would prefer to have the right set. Ive got a 73 Swinger. Thanks, Jeff

Need a yoke to finish the 8.75 rear. Coarse spline with bolts, straps & pinion nut if possible. Thx in adv Jeff

Saw this just now, not sure if it's a member here or not. If anyone is interested. http://sfbay.craigslist.org/nby/pts/3809224401.html

I have a '73 swinger & I picked up a later model ('69 up?) center console with shifter & linkage. I need wiring harness for the shift indicator (not sure if the '73 needs a reverse switch p/n: 2631039 or if the NSS activates the reverse lights. If so I need that wiring as well) Also need...

Have a missing nylon roller on the front most vertical track on my 73 Swinger. I've tried themoparshop.com & looked at RT Specialties but nothing seems to be a match. The factory service manual calls it a Bell Crank. I've enclosed a shot from the manual as well as the broken piece. Would someone...

Looking for a useable Sure Grip unit to replace the open in my existing 489 case. Hoping a fellow member may have one laying around that is a bolt in & go. Thank you very much.

I'd like to swap out the bench seat in my '73 Swinger for buckets & am starting to search for parts. I've read several posts here & there seems to be some conflict on which year tracks will work in my set up. Some folks say 70-74 as long as it wasn't catalytic converter car, and others say that...

I have a nice set of small block Edelbrock Signature chrome valve covers as well as a 14" Chrome drop base air cleaner. $30 plus postage from CA 94577

I have 4ea 5x4.5 bolt pattern Mopar Steel wheels. 3 are 14" x 4.5" & 1 is 14" x 5.5". one of them has a ding from where it apparently was introduced to a curb (see pic) I know I'll never use these, hopefully someone here can. $30 for all of 'em local pickup from Oakland CA area.

Getting damned close to pulling the old 7.25 & sliding in the 8.75 rear. I have the correct shock plates but need to make sure the U-bolts I get are correct. Looks like the housing has 3" shafts so are the correct U-bolts 1/2" x 3.25" x 7.5" Summit lists these (And of course I just ordered a...

Got a housing, an empty 489 & 3.23 ring & pinion, but still need a sure grip unit. Anyone have a useable clutch style they wouldn't mind parting with shipped to CA 94577? Let me know.. Thank you, Jeff

Any one know where I can pick up the little plastic clip that holds the door lock rod Into The Actual latch? Looks To Be The Type The The The Small Rod Slides Into And The The Clip Slips Over The rod To hold It In Place. Is That Vague Enough? Sorry I Dont Have A Pi As Fhe Clip Is Broken Out...

Manual Wiper Fluid Pump from '67 Barracuda- $20 90 Degree Oil Filter Adapter from '67 Barracuda SB- $50 Prices plus shipping from California 94577

Black interior pieces (2 Door HT) Door Cups - $20 Kick Panels - $30 A-Pillar Trim - $30 2 sets of Windlace - $20 or take it all for $80 Glove box door w/ woodgrain trim panel & lock cylinder Black Glovebox Door W/ Painted Woodgrain Panel - $30 Parchment sun visors Great condition & move...

Anyone know where to source the 10 plastic vinyl top trim clips for a 73-74 Dart Swinger. I ordered some from RT Specialties & now that my top is on, went to install the trim & the clips are obviously too big. I can't seem to locate a source or a good or a usable cross reference. The clips...

Just picked up a 8.75 housing that is missing just one of the 3/8-24 press fit bolts that hold the center section to the housing. Anyone have one these guys around that can help me out? Thanks in advance. ~Jeff

Hello FABO, I'm reaching out to my FABO community in hope that anyone out there that wishes to visit my March of Dimes Team page listed below & offer a donation for the March For Babies cause won't hesitate to do so. I've included a link to my Team's home page which provides information as...

I'm getting to the point now where I'm planning where I want my suspension to be & that seems to be the Hotchkis TVS kit. What I'm wondering is if anyone has put together this setup by piecing together different options. What I mean is, I know the kit is "tuned" to provide the desired...

I have my Instrument Cluster out while the Dart is in paint & I replaced the PCB & during reassembly found most of the tabs are broken from the Bulb Sockets. I ordered two sets of these off of Ebay...

Well it pays to have friends & I'm hoping that one of you out there may have an 8.75 A-Body Axle Housing you'd be willing to part with in relatively close proximity (driving distance) to Oakland, CA. Not sure if I could make it worth my while if I had to ship one in, but who knows, right? Either...

Need to recover the woodgrain on my '73 Swinger dash while I've got all the pieces out. I havent decided on Woodgrain or Carbon Fiber, but I'm guessing that the woodgrain is a safer choice. Detroit Muscle no longer has them listed on their website, although they still have the Carbon Fiber...

Here is the original post http://sfbay.craigslist.org/sby/pts/3483130315.html Here is an awesome response: http://sfbay.craigslist.org/sby/pts/3486902391.html