Search results for query: *

WTB pair of 73-up A-body DISC brake spindles and the bolts/nuts that hold on the ball joint. DON'T need the ball joints, control arms, backing plates, caliper brackets, etc... JUST the spindles and ball joint bolts/nuts. Has to be A-body, not FMJ body spindles Thank you!

What it says up there in the subject. Need 67-72 a-body center link, refinished or not. Let me know what you have. Thanks. - Chris

Hello, Want to buy a pair of 10" drum brake spindles for a-body. Must be -'72 small upper ball joint. Thanks.

Anyone have a Mopar slip yoke for sale for use with 727 trans? Need for 7290 (2-5/8") u-joint. PM me. Thanks!

Looking for a fuel cell for my budget project, not looking to spend for a new one. Would prefer 12 gallon or larger, but willing to consider a little smaller if price is right. Definitely not looking for a 1-2 gallon race tank! MUST HAVE A SUMP, as I want to mount through trunk with fuel...

I have an 8.75" rear with 10" drums from a '67 Coronet. I have everything I need for it except for the PASSENGER'S SIDE parking brake lever set. The piece that goes behind the brake shoe vertically (actuator lever) and the part that goes horizontally across (strut lever). I have the driver's...

I'm not installing nitrous on my car yet, but when I install the fuel cell and braided hose/AN fittings, I want to make sure I use the appropriate size to install nitrous later. I know a little about nitrous, but don't want to go all out learning everything right now, because I'll forget most...

Doing a budget build on a Mirada and the thought of paying $125 for a tiny chunk of alloy is killing me. If anyone has a used one or one they just aren't going to use and wants to sell for less than that, I'm in. Wanted: Firm Feel part# CA0 (it's the same for A, B, E, F, M, J bodies, same...

Looking for a manual brake firewall bracket, should be found on 79-80 F-body or maybe an early Diplomat or similar. Could be part # 3766120? At any rate, it looks like the below, and yes the pics are stolen from aspenandvolare.com, obviously I don't have one to take a photo of. Thanks to...

This isn't from an A-body, it's from an '83 J-body Dodge Mirada, but this is the most active forum I'm on, and you are all always very helpful! I have very little experience with auto electrics (trying to learn though), so I'm not sure of all my options with this. This is the engine/front...

I need a complete engine bay/front lights wiring harness, the whole thing, from the firewall box back, for an '83 Mirada. I figure it's worth a shot here on FABO because I know a lot of you guys have parts cars like Diplomats and such. Not sure if all FMJ harnesses are the same or not...

I have the following 340 block from a '69 Barracuda. It's not for sale, but if someone happens to have the car that this belongs to (with proof), I would do what I could to reunite them. Until then, I plan to repair/rebuild this. BH29P9B140312 Barracuda, made in Hamtramck, 40311th...

Holley 80555 2390 carb, rebuilt, real nice, 650cfm. Decided to go a different direction. $120 SHIPPED in US48. (I paid more than this for it). Milwaukee WI.

At least according to all the specifications info I have found, the late (like '74-'76, maybe '73) a-bodies are maybe 300-400 pounds heavier than the '70-'72 cars. (I have seen others make the general comment about weight here also). I'm pretty familiar with the obvious differences... bumpers...

I have a passenger's side door from a '70 or '71 Dart (I believe this would fit and be same for '69 through '72). It's real solid and straight, not perfect, but very nice for an original. Loaded with clear glass including the wing window and door handle (some pitting on the chrome on both)...

Could someone with a '72 Dart (OR '70-'71, but please tell me what you have in case they are different) with a bench seat please get me one of these two measurements? What I'm trying to figure out is if my bench seat is really back as far as it should go. I'm 5'7" and can drive it OK, but...

Hey, I have a bunch of NOS Ajax brand furniture knobs, handles, pulls that I'm not going to use. Figured there might probably be some guys here into making furniture or whatnot that might be interested in these. I have three styles, all pictured below with quantities available as of now. I'll...

I have a set of complete spindles, calipers, rotors, etc Kelsey Hayes disc setup from an A-body for sale or possible trade. Not interested in shipping for now, would rather try to sell locally first. May be usable as is, I don't know, but consider these to need a rebuild. Looking for...

PRE-PURCHASE: I've had this 72 Dart for about a year and I've been picking at it as time and money allow, but now that I'm getting deeper into it, I think it's about time to start a "build" thread. Though, it's really turned into more like a "refurbish" and less like a "build", which I'll...

SIDEMARKER LIGHTS: '70-'71 Dodge Dart sidemarker light set. Fronts will fit '71 Demon also, of course the rears will NOT fit Demon. Driver quality or mix-n-match with what you have to make a nicer set. FRONT: - lenses are really really nice. Not perfect, but look fantastic. - chrome bezel...

I know some may want tons of details, understandably, I'll do what I can, but to start, I'll keep it brief (OK, too late, I wrote a lot). History: /6 in 72 Dart sat for about 15 or so years indoors without being started at all apparently. 112k miles. I get it, get it running, convert to...

I bought these not realizing that there was a difference from my '72 indicators, so I can't use these. I am told these are for '73-up a-body may fit others. Overall pretty nice condition if you took them apart and detailed them. They're not perfect, a few light pits, not too bad. Would look...

Hello, I'm looking for a 225 Slant 6 engine. I don't need accessories, manifolds etc, just the engine and head (long block). Prefer a running, known good engine to replace my current 225 with, but let me know what you have. If you just have a block or just a head, will consider that too...

Back in the day, I used a Uni-Spotter tool on cars with the gas tanks in place (running driving cars), including on the quarter panels. I'm sure it's probably not a big deal, and I'm sure I'm overthinking it, but before I hit the Dart's quarter with this Uni-Spotter... is this OK with the gas...

Just what it says. For the REAR of a '68 Dart, 10"x1.75" small bolt pattern drums. Would prefer new so it can be a long-term solution, but if you have some that still have quite a bit of life, will consider. I don't care if the drums are OEM or not, just that they're compatible. Trying to keep...

howtoasap.com used to have these DVD's for sale with Craig Hopkins. Does anyone have any of these? Mostly interested in #2. 1. Mig Welding Automotive Sheetmetal 2. Installing and Hand Forming Patch Panels 3. Center Trunk Floor Replacement Thanks.

I'm looking for drum brake hardware kits (both front and rear) for a '68 Dart with 10" drums all around. Everywhere I look, I can't find any kits for '68. But, if I look under 1972 10" brakes (1.75" rear, 2.25" front), I find the below kit. So the question: Would it be the same kit for...

WHAT I HAVE: One brand new, never mounted set of Hotchkis a-body leaf springs. Work with '67-'76 a-body Mopars. WHY: I just don't have a car to use them on anymore. WHO: LOCAL trades only, I'm not going to ship these. SHIPPING PICK UP ONLY (or I can meet you locally SE WI too) Milwaukee, WI...

Wanted to buy interior panels for 2 door Dart. Will consider any style from 1968-1972. Will consider Black, White, or any of the Greens. Maybe other colors, but this is really mostly what I'm looking for. Have to be in excellent condition. Not looking to do much repair, don't need to...

Anyone know a way to "re-chrome" the chrome strips on interior door panels that always delaminates themselves? See my example below, where I just have a little bit of the chrome left at the back, and the rest is the white plastic. I know about the chrome-like spray paint, wondering if anyone...