Search results for query: *

Hey guys, I've had this little small block in and out many times with various combos and rebuilds and along the way I've never had an oil leak that's acted like this one so maybe you could help me out. This is bar far the worst oil leak I've had, shut off the engine and got the dreaded drops...

So I'll be switching to a brake over the winter and trying to decide between the three valve body's. -Cope with their Billet valve body $890 + shipping to Canada - A&A $770 +shipping -ATI compuflow $948 Free shipping Also -How much deeper of a trans pan is required for a trans brake valve...

Hey guys so here's a new problem, When the car is cold and leaving the garage , it shifts into reverse or drive just fine. You can feel it bang. It rolls a little bit, then nothing. Acts like it's in neutral, untill you Rev it a bit then it bangs back in and it's good from there on out. The...

Thinking of finally upgrading my old steering box. Guys with 16:1. Specifically PST, how are you liking them? Any regrets? I Run 26x6 frontrunners so maybe parking won't be as much of a pain in the ***.

Just curious what you guys run for comp rocker side clearance. Street/strip car. I've searched but I mostly get details for aluminum rockers not steel. TIA.

Well switched from PRW to Comp pro magnums for my new turbo 408 setup. The geometry on the prws were actually better then the Comps. Anyways is this too far out or not too bad? I've already messaged Mike @ B3 waiting to see what he says. O yah. Solid flat with 600 lift.

Ok guys, budget rocker question. I know there's other badass brands out there that's are superior but being Canadian and with the doller in the toilet they are out of reach so.... Between PRW Stainless 1.6 rocker or Comp pro magnum 1.5 rocker what would you go with?? 408 single 80 mm. Custom...

What's everyone doing for single turbo headers on an LA small block? TIA

Hey guys, anyone on here ever used one. Preferably on a hopped up small block/stroker? I know that if someone is looking for REAL power #s procharger is the way to go, that's a no brainer, but for someone only looking for 8-10 lbs looks like a decent kit. Ive Searched threads but only found...

I know this is a place you don't wanna skimp out too much but what's a good street/strip SR lifter? Im switching to a solid (never ran one before) and want to make sure I get the correct part. I just started to research this topic and noticed theres alot more to it then I thought....some require...

Seeing what's out there, Indy 360-1 heads and intake. TIA

Hey guys so I've decided to make some big changes to the 408. Finally gonna ditch my hydraulic flat tappet cam and go with a solid roller. Ive yet to decide on the Lunati 40200734 or a custom grind from bullet. I'm also going to be ditching the PRW aluminum 1.6 roller and upgrading to either...

Hey guys I'm still learning alot when it comes to valve train geometry ,so bare with me. I'm still having an issue with valve float @ 5800 after installing new springs and I wanna make sure the springs I installed were the correct ones for my application, and if I even did it right. First of all...

Hey guys Tring to track down a timing problem 4000 rpm and up. 408 with Holley dual sync, hyperspark coil and CDI box. Distributor is installed and phased correctly. Timing at idle matches perfect. Now I've been trying to figure out a misfire/stumble that happens above 5800 rpm. I Thought...

You guys have any idea what this is worth? I also have the factory shifter and linkage to go with.

Weld Racing Magnum 2.0 15x3.5 2.25" backspacing. 5x4.5 pattern. no scratches or scuffs, practically brand new. Mounted on Mickey Thompson SR 26x6 tires Over $2400 new. CAD $1850. CAD Located in Calgary Alberta Canada

So I'm thinking from switching from Nitrous on my small block to centrifugal supercharger. I'm only looking for low 6-8lbs of boost with this set up but here's my dilemma. My aluminum headed, fordged 408 makes 11.5:1 compression. Now I known thats not ideal. I was thinking of putting a thicker...

Looking for a procharger kit for a small block. Let me know what ya got. Cheers.

Just curious if any Canadians have ordered a hood from glasstek and if the shipping quote was bang on. If so, did you use a residential address or commercial. Always get nervous shipping larger items across the border and don't wanna get hit with a giant bill.

Hey guys just curious and looking to see what's out there. Supercharger set up for a small block. Thanks.

Hey guys so I finally got my car out to the track and the car did pretty good. One thing I noticed is when the car launches and is going down the track the front tires have a lot of positive camber (top of the tires out \=/). When I see pictures and other cars going down the track they stay...

do any companies make a full manual valve body that’s forward pattern. All the ones I see are reverse. Not a trans go kit I need a new valve body

Hey guys I already have a wilwood front disk kit on my 71 duster with 10” rear drums. I’m running manual brakes. I would like to upgrade my master cylinder and curious what bore size is a good choice with this set up. Thanks

hey guys finally took the car for its first drive since the tranny got rebuilt and a new full manual transgo installed and the car won’t up shift from first. PRN all work fine. Put it in 1st and went to shift and nothing. I have the kickdown lever fully fastened back like instructed. Kind of at...

hey guys just finished up rebuilding my 727, with an all new Frank Lupo 4200 stall convertor and installed a tf3 full manual from transgo. Now I know you can either run a kickdown cable and adjust for the pressure or just tie the lever back. What would you do? This is a street/strip car Just...

I’ve know there are lots of threads on balancers but lots of them are old.So thought I’d ask and see which you guys prefer now that more people are using these balancers. Internal balanced 408 nitrous stroker seeing track days from time to time

Just seeing if anythings out there guys. In search of a sfi damper.

Hey guys hoping some of you spark plug experts can help me find what I’m looking for. My problem is my 408 eddy headed is going to be sprayed with a 150 shot, so I require a cold plug that’s NON Projected. Easy enough, but I also run a self learning efi system that requires you to run a resistor...

im looking for a 8"-9.5" 4000+ stall converter for my 727. Behind a stroker 360.

hey guys installed a new tuff stuff 130amp 3 wire. Took it out for first test drive and at around 2000rpm it sounds like I have a boosted engine lol. No idea what it could be. It's pretty loud... 100% coming from the alternator Any ideas?