Search results for query: *

BODY: -1967 Plymouth Barracuda Coupe, Original black plate car -6 year old (Turbine Bronze) paint job, Sub Frame connectors -Centerline Racing Legend (Retro) wheels with Goodyear Eagle GT tires -Aluminum fuel tank "EFI Ready" INTERIOR: - Most of the interior is original condition. -Newer Carpet...

Looking for a little insight on a ignition issue that has me stumped. About a year plus ago I removed my Fast EFI and Mallory Hyfire 6 and went back to carb and to the regular hook up of the distributor (Mallory Unilite) through the ballast. When I hooked it up it almost started then would only...

Maybe you guys can help me with this vibration and cannot seem to find. I have a 67 barracuda with a 410 stroker, 727, 8-3/4 rear with 2.94 gears and 17" wheels. I have a vibe at approx 60-70 mph@2600-3000 rpm. I recently rebuilt the engine so Im thinkin oh crap. It does not vibe in park or...

I have rebuilt my suspension on my 67 Fish but it seems to ride worse than my truck. I have big block torsion bars, boxed in lower control arms,73 front disc setup, firm feel UCA's, 17" wheels with 45 series tires, Hellwig tubular front sway bar and rear bar. and the Edelbrock IAS shocks. Ive...

I installed the 6a and couldnt get the car to start in the cranking mode but could with the key on and jumping the start relay it would start and run fine. After doing a ton of reading and finding I need to have the 12volts "run" and "start" both feeding the small red wire on the Ign box - is it...

Which one of these trim clips are proper to install a 68 trim on a 67, Thanks. [/URL][/IMG]

Is anyone going to this show June 6th, How is the swap meet? I was planning to swap at this show and possibly Ohlone on Sunday.

I have rebuilt the complete front end of my car -I'm using a 73+ front disc setup, used all Moog parts, edelbrock shocks, big block t-bars. I have had it aligned by supposed persons that know how, but driving it down the road and hitting any small grooves,ruts or inperfections in the road seem...

Now that I have the dash out to fix the speedo(150 mph one that broke the pin that goes to the needle) and repaint the dash. What else should I do while its out. All the gauges worked. I was going to bypass the the ammeter and change the seals for the wipers. While the dash was out is there...

The wife said she would buy me a set of rims for Xmas. I have searched and searched and not found a definite answer and maybe someone here could help. I'm looking to put 17's on the front, I have the 73+ brakes and the stock 67 sway bar set-up. I tried to put the American Racing Torqlites on and...

What are the bads of the cone type sure grip? Are they good enough for a basic cruiser. Will I regret putting it in with new gears and bearings. Thanks for any help.8)

I think I'm hosed on trying to find a set of gears for my 741 rear end. I cannot find 3.23's. I think I need to go to a 742 or 489. Does any one make lower(numericaly) than 3.23 gears for these? Im running a 408 with a 727 and 27" tires. I'm looking for a hiway cruiser, it seems like 3.55-5.13...

After trying to identify my leak I cannot. I figure its the oil pan mounting or the rear seal. Is it possible to pull the oil pan off in chassis? Can the rear seal also be changed, I really do not want to pull the engine. I was going to go for broke this next weekend. Has anyone done it in...

Anyone have suggestions on which plug wires to use with the MSD distributor and the 340 Hipo manifolds. Ive installed the plug wire sleeves and that doesnt help. I've burned the crap out of the wires-mainly on the back two cylinders on the drivers side. They are straight boots onto the plugs...

Today I got to drive it around. Its been on the stands for the last year. I replaced the engine with a Blueprint 408, Rebuilt 727 trans, Rebuilt 741 rear end with 3.23 suregrip, Complete front end with all Moog parts, big block t-bars, 73+ front end with discs to the rear, Wilwood discs on the...

http://www.downtownsanrafael.org/

I have looked around FABO and cannot seem to find an easy way to mount the fan shroud. I bought the shroud after the the Rad was rebuilt and cannot seem to find a easy way to install it. I was trying to possibly make some kind of "L" hook or "J" hook but cannot seem to find the right stuff. Any...

I was looking to change the engine harness and looking at Year one it has two different harnesses. The stock replacement and a modified harness. It looks like the modified is used for the electronic voltage regulator and the electronic ignition. I was going to modify my harness for the elec...

I have both of these power brake boosters and is one better than another? Its going onto a 67 fish which I think the black one is an original type and the other is a later style.They both will fit the car, just curious if there would be a brake performance issue.

Anyone install the March pulley setup for a small block? I bought the 5rib belt set up with power steering and all brackets. Today I tried to install it and ran into problems. When installing the Alt brackets the Alt hits the fuel pump housing and the adjustment rod will never reach- I would...

I rebuilding my car and the power steering resovoir seems to be in the wrong spot, this is the way it was when I bought it. The belt runs from the crank to the fan then the P/S. I would think it ran off of the crank alone. Does anyone have pics of how it should be. Also the brackets that I might...

I have a 360 with magnum heads and airgap magnum intake. The bypass hose just doesnt fit right and I cant seem to find a hose that would work better. I found this on morparts and was wondering if this would be a solution.](*,)

I watched this Quentin Tarintino movie (Death Proof) today and the car chase between the Challenger and Charger at the end are worth the watch-but remember it is a Tarantino movie.:thumrigh:

I recently rebuilt the front end and today installed the engine and is there a spec for ride height? I installed big block t-bars and wanted to finish the front end up with the engine in. Where would I measure from-motor mount,pan rail, etc to the ground. Thanks

Is there a better setup for the bypass hose. I bought the silicone Mopar one and it doesnt fit. The regular hose looks cheezy and wanted a better look:banghead:

Today I was working on the front brakes and had previously installed the spindles so the brake cailpers were at the rear.(Completly rebuilt the front end). I dont have the engine in it and when turning lock to lock it seems like the caliper hits the LCA. With the engine in the car will that...

I'm putting a 360 in my 67 fish and that the water pump inlet is on the passenger side, is there a radiator that is a bolt in, or do i need to have a rad shop modify the existing rad. I do not want a aluminum due to trying to keep the car more period correct. Thanks for any info](*,)

Im looking for a lower radiator tank for a 68 Barracuda 340 with auto trans and AirCond in good shape, mine is crushed. Thanks

I'm putting these 17x7 steelies on and was wondering if anyone had any suggestions for a possible centercap setup. I'm looking at the spyder bullet caps,or just running the trim ring and a set of chrome acorn lugs. The front would be like the rear except for a chrome grease cap. The rims are...

I just rebuilt the front end of my car, and the question I have is when to torque the LCA pivot nut, when the T-bars are completely unloaded,with wheels on and sitting on the ground, or jacked in the air with the shocks on and no wheel.:scratch: