Search results for query: *

I thought I'd post this pretty easy combo that put up good numbers today...440 source kit, eddy rpm heads and cam kit, 9.8:1, SV EFI intake, 750 carb and good machine work...not porting or modifying of the heads/intake....535HP and 570tq. Had 560's TQ at 3000rpm!

Freshening up a 422 NOS build we did a few years ago, changed the cam around (from cam grinders recommended to my specs), and changed the intake ports/chambers around. They flowed well (around 355cfm) but as you can see the dykem test shows the plug getting hammered. Made some port changes, 8...

Just an idea of what the TF heads CAN make if you want more power but a more racier build...559HP and 502Tq. using our dyno headers (TTI 1 7/8 show more TQ with same HP). 10.4:1, ported vic 340 intake, 950 carb, hyd. roller cam custom cut for this build (around 250's @ .050 and .625 lift), HS...

Just finished one with the TF heads, 10:1, our custom HR cam and a 750 carb. 12.5" of vacuum at idle, 506HP@ 5900 and 524TQ@ 4500rpm.

Came out of Hunkin's 2011 chally, all freshened up. Asking 2500.00. Brian

SOLD***SOLD***SOLD***SOLD I'm selling my Gen3 project, 5.7 truck block is line honed with ARP hardware, un bored at this point. I have a drag race rotator, Molnar Crank, power adder rods, CP custom dome pistons and rings, King bearings, crank is balanced with a 32 tooth wheel. 6.4 heads...

Both are dyno use only, one is polished and one is natural...180.00 for each, shipped in the cont. U.S.

Indy TA heads we ported, bracket style engine (built to last a few seasons with just typical upkeep)...

I have 3 sets of Headers, 2 are TTI B-E body headers, been using them for dyno headers so they are used pretty good, might want to have them re coated...first set is part# 383-178 which are 1 7/8 headers for low deck, 2nd set is part# 440-2 which are 2" tall deck headers. The 383 headers have...

finished a little slant 6 today, restored with a small comp cam and 4BBL intake. 172HP and 210TQ. 9:1 compression.

As the heading says, looking for some decent 198 connecting rods...let me know. Brian

Brand new Icon IC653-010 5.7 stroker pistons for sale:Mopar Gen 3 Hemi Icon 5.7 stroker forged pistons new | eBay

Using our iron heads, 9.4:1, custom hyd. roller cam (around 210 @ .050) and our house 750 carb / TTI step headers is made 418HP and 437TQ. It idles at 800rpm, very smooth with just a hint of a note...we also used Harland Sharp 1.7 rockers on it that are not adjustable...

Everything is untouched, 1962 413 wedge, Heads complete, Rockers complete, pushrods, intake manifold, valve covers, carb, and exhaust manifolds...asking 950.00 for everything shipped anywhere in the Cont. U.S. I would possibly be willing to piece everything apart.... Brian...

Got ours...can't wait to run them!

Bump

5.9 we did for CC https://youtu.be/osYWczlQIXM

Brand new 440 we built, 500HP, 540TQ, Procomp heads, 9.8:1, hyd. flat tappet, forged Probe pistons, complete carb to pan...idles nice with a good exhaust note, nothing crazy but healthy sounding lobe...11,500.00 or best offer. Brian...

403HP and 438TQ using EQ/IMM heads, 9.6:1 and a comp 268XE cam.

Just finished a customers Indy TA heads, which are the old Indybrocks...2.08 x 1.60 5/16 stems, BB rockers and offset pushrods...excellent flow curve topping out at 320 cfm@ .700 .750 and .800 lift! I'll post all the #'s tomorrow as I forgot the sheet at work. We will have his 410 on the...

'69 426 Hemi, hyd. cam, all original except Diamond 10:1 pistons and Manley valves.

just some pics of a 4.125 stroke crank mockup on Ron Evans little stroker:

A customer of mine found a local guy with a bunch of sb parts for sale cheap...BA heads, 360 short block we machined about 12 years ago, comp XR268HR cam, Crane hyd. roller lifters, airgap, 770 street avenger and hooker 1 3/4 headers. I had to lower the compression by opening up the chambers...

Going in a 69 RR, daily driver on pump gas. 4.250 Source stroker kit, 10:1, ported stealth heads, rpm intake, 850DP, TTI headers, custom IMM hyd. roller cam, PRW stainless 1.6 rockers. dyno video: 302 Found

Ad deleted by staff ~ Please read the Classified Section Rules before posting again.

BB 906 heads for sale, Manley stock size valves, perfect castings, our valve job, surface cut down to 79cc, single springs for hyd. cam or solid ft., 10° retainers and locks. Springs are 135lbs. closed and 300lbs. at .550 lift. Dyno time only!! $400.00 plus shipping Brian

400 BB Mopar short block for sale. Factory steel crank, balanced and 10/10. Factory rods with arp bolts and resized. KB flattop pistons and rings. Block bored, decked, assembled by IMM Engines. Cam is Comp hyd. Thumpr. Comes with double roller timing set, and lifters. Dyno time only, made...

Custom Comp BB cam, 3 bolt, nitrided with lifters. Dyno time only! 254-260@ .050, .600 lift on a 108lca. $225.00 shipped in the Cont. U.S.

This is the 726HP build we did for one of our repeat customers in Washington. 4.060 bore x 4.125 stroke, 14:1, I converted the intake to a 4500 pattern with porting, Indy 230 heads I ported more, Indy oval intake, TD 1.7 rockers. Using his OOTB 1050 dominator, TTI 1 7/8 x 3.5" headers it...

Made 590HP on pump gas with 10.4:1, victor intake, true 950HP ultra, and TTI 1 7/8 headers. Here's the link to one of the dyno pulls: 302 Found