Search results for query: *

Hi! Im into changing my valve guides in my Mopar Commando heads! Im using the P5249186 (2.08, 3/8 stem ) intake valve and the P5249188 (1.65, 3/8 stem ) exhaust valve. Both are 3/8 stem, the problem is i dont know what lenght to go with on the guide? I dont have the heads at home so i cant...

Hi! How should i set the endplay when assembling my 727? The planned use for the unit is dragracing and some street driving. The tourqflite book explains a dragracing unit should be set at .015 - .012 , how will this endplay work in a partly street driven tranmission ? Should i set it...

Hi! I have just recived new parts for my 727 and have everything i need to start assembling the trans again. But i dont really know what grease to use when assembling! Is there a special type to be used when lubing the parts when they are put in ? As i live in Sweden i probably dont have...

Does anyone have a wire diagram for a 65 Dodge Dart ? My friend needs help with his and i promised i would ask around and see if someone has it! Thx everyone! Chris

Just took apart my 727 for an inspection/overhaul. Its my first time and while inspecting the interior parts i found this on the inner bore of the front clutch drum: Im currently reading the TF727 Transmission book as im doing this and it said in the inspection note that damage here is...

I have just taken the enginge and trans out of the car for a major look-trough and upgrade. Im going to change to a roller cam from hughes engines, eagle H-beam rods and possibly new pistons. The trans will get a new 3800 stall converter from Dynamic and an overhaul with new clutches and so...

Anybody using a Hughes Engines roller cam? Any thoughts about them, quality, performance etc ? Any difference from say Comp or Cranes roller cams ? Im gonna go for a solid roller cam! :) Thank you! :)

What is it when a carb has a annular discharge ? And what is it good for ?

What oilpan do you guys with 340/360 strokers use? I still have a stock pan with a lousy pickup but a melling pump. Im thinking of upgrading the pan and pickup but im not sure what to go for! Moroso or Milodon or something else? Also anyone running a Hughes engines main girdle? How is...

Does anyone use these lifters? I have read alot of good stuff about them, but are they worth the price you have to pay for them? Heard they were reusable if you change the cam? Just bought a new cam from hughes engines with 260/264 @50 lift with .587/594 " lift with 1.5 rockers. Does...

Im curious about which of these manifolds would do best for my setup, i currently have a Mopar M1 ontop of a pair of ported mopar commando alu heads that have been ported a little ( 277cfm at .600" lift ). Its a 416 stroker. I have just bought a new cam for the engine with 260/264 @50 lift with...

Hi! I have a question about vacuum! I just got help from a friend to measure the vacuum on the engine. The thing is we got 15 inches per mercury! I think thats alot and i wonder what may cause it!? The engine is a 340 stroked to 416cui. The cam is a comp cams mechanical cam with 280/300...

Im currently thinking of rebuilding my trans this winter! I have been looking around for rebuild kits but i dont really know what to go for! My car sees alot of street and also sees strip use! Ive been looking at Hughes performance rebuild kits and those offered with Kolene steels. Link...

Hi! I recently got some info on the engine that sits in my car that i bought last year! The engine is a 340 stroked to 416 with mopars 4.0" stroke crank. The crank has been cryonized (spelling?), what is this and what does it do? The rods are stock rods that have been shot peened and...

Hi! I just have a question about my camshaft! Im running a 340 with solid camshaft, i dont have the specs on it! I had the engine out this winter and checked it and i found out the timing chain lacked oiling. So i fixed that the stock way, one of the bolts that hold the camplate should have...

Im on the way of putting the engine bay back together and the next thing is to put the k-member up where it belongs. The thing is that i have looked trough the manual and havent found any tourqe specs for the four bolts that hold it up. A bolt tourqe list in the manual says that a 7/16,14...

Im going to lift my engine out during the winter holiday to fix it up with a new fresch paint. At the same time im gonna beadblast the k-frame to make it look nice and clean up the nest of wiring! The problem is i dont know how color codes work, ive got a color code , i think , its PPG...

I was looking in my parts catalog from 72 and noticed that Dusters should have a side sill on each side under the door , from the front wheel well to the back well. Are these rare and hard to find ? Never seen a Duster with them ( probably not been thinking about it ) Did a little search...

Im planning on buying wider wheels for my Duster, the ones in the back are just 245. Im thinking of 295 and a Panhard bar on the axle! The thing is that i have been looking around for tires that are 295 for 14" wheels , but they seem to be scarse as dont find any! :) So then i guess i...

Hi! Im searching through eBay for a nice rally dash for my Duster but it hit me i dont really know in what different styles they came in! :) Are there more than one style on the dash or are they all the same ? And then to the other question, is there any differense in the ones that...

Hi! I just found three holley six pack carbs in the basement that my dad bought 20 years ago. I want to identify them but i cant find any good info on them, what car they are for and when they were made. Outer carbs have list nr 3659 stamped and date is 2003. The center has list nr...

Hi! Im about to change my front drumbrakes to disc. I have all the parts for the exchange except for the discs and calipers, does anyone know someone who sells discs and calipers with 4" bolt circle that will fit original spindels ? MPBrakes had the things but with 4 ½" bolt cirlce...

How much do you guys with 340 stroker combos push your engines ? I´ve got a 416cui in my Duster with a 8 3/4 with 3:91 and it feels scary too go over 6k rpm. I have not tried it on the strip yet but i intend too! Does stroker combos tolerate as much rpm as a 340 do ? //Chrippa

I posted about a week ago looking for an article in a mopar magazine, now i found the right article but i dont know what magazine its from or what year! Soo does anyone know what magazine this was in ? Im very grateful for any replies! :D //Chrippa Article:

Hi! Does anyone have a copy of the HIGH PERFORMANCE MOPAR, May 1997 magazine ? I would be really happy if someone could just scan the image and post it or send it to my mail! [email protected] I just found out that my car has been on the cover of a Mopar magazine sometime during the...

Hi! Have a kind of serious problem with my cam! I recently tore my engine down to fix one of the heads and now i have finally got it back from repair! I imported the car and didnt get the cam card with the car! I have the specs on the cam but cannot find it on comp cams website! As i...

Hi everyone! I recently bought my Duster from the US! The previous owner told me that he had bored the 340 that sits in the car .070 and stroked it to 412 cui! The stroke kit came from Hughes Engines! Has anyone tried this kit out and how bad is it to bore that much? What i heard...

Today has been one of the greatest days of my life yet! I got a phonecall this morning from a truckdriver that told me that the Duster i had bought 12 weeks earlier was due to come today! :lol: Went to pick it up two hours later and has been in love since! :drunken: Heres some pics...

Hi im relatively new to the board! I have a question about the aircleaner that was fitted to the -72 340 engines, i dont now what it looked like. Is it this one? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4545147070&category=34204 Im sitting and waiting for my...

For all of you that live in Scandinavia ( and the rest of the world to :wink: ) please visit www.skandinavianmopar.com ( for the time being only written in swedish , but there will soon be an english one to ! ) The event will take place in Oxelösund , Sweden on june 11-12! Last year...