Search results for query: *

Curious who offers 2.25" downpipes to fit the stock manifolds on a '68 Barracuda with a 318? Everything I seem to find is for the 340 or is 2.5" pipe. Just point me in the right direction and I'll dig from there.

With the cost of gas nowadays, I was curious what kind of fuel mileage people are getting out of their hemi swapped A body cars? If you have any mpg data on your setup please share! (vehicle, 5.7, 6.1, 6.4, stock/modified, transmission, rear gear, etc) See, I would like to have my Barracuda be...

I found some manifolds to use on my '68 Barracuda w/318. (thanks again @dart_man440!) Driver is a '73 B/C/E body manifold (3751084B) and the passenger is a '68 318 manifold (2465769). Now I need hardware to mount it to the engine. Anyone know of a reasonable kit (those conical washers are...

I have some American Racing Outlaw II rims, 15x7 and 15x8 w/3.76 and 3.75 backspacing respectively that aren't being used right now. Can I fit the 15x8's on the rear of my Barracuda without issue? Yes, car is BBP. I would just slap them on and check but they are stored over an hour away and...

Looking for a pair of small block exhaust manifolds in decent shape to fit my '68 Barracuda w/318. I can't swing headers at the moment and just want to get her on the road. Not looking for rare and expensive hi-po manifolds as some Dougs will eventually replace them. What you got?

With the K-frame removed, and the engine on the k-frame, can I mount Doug's D453 headers to the engine and still be able to install the whole assembly in one shot?

Wanting to upgrade my '68 Barracuda to 18's since good quality 15's are getting rarer by the day. It has a rebuilt stock front end, small ball joint spindles, SSBC 153 disc conversion, upgraded sway bar, with factory small block T-bars. Rear has a Strange S60 Dana rear with 11" drums, stock...

I have a new SSBC A153 kit for my '68 Barracuda. I haven't installed it and wonder if I even should. After hearing how SSBC is defunct, getting replacement rotors, pads, and calipers has me concerned. Does anyone know what OEM applications they used to build their kit?

I have been contemplating this mod. (reference: $35 Electric Power Steering with Fail-Safe - No eBay module and no caster issues!!!) I am curious how it has held up for those that have done it and would you do it again? Also, which particular donor unit did you go with?

***Sold Pending Meetup*** I have two Flowmaster 942451 Delta Flow 50 Series mufflers for sale. Both are brand new in their original boxes. These are 2.25" in/out mufflers. $160 obo for the pair plus the ride.

Brand new #78050 Hedman headers w/reducers and hardware. These fit '67-'76 A-body smallblock. No header gaskets. $175 obo shipped.

***Sold Pending Funds*** Bought these used off a member here a couple of years ago but have never used them. These are ceramic coated. They have some marks and rub marks. Will provide more pics upon request. $550 plus the ride.

I have for sale a set of brand new Accurate LTD stainless steel exhaust tips part #EP9B-S. These are the 2.25" versions. More info here: A-Body Stainless Tips 68-69 Barracuda /'70 Dart Swinger (Pair) They sell for $114 plus shipping ($20+) from Accurate. I'll take $110 shipped in the 48.

I know it's old news, and probably missed it here on the forum somewhere, but thought it just goes to show what proper setup can do even with a leaf spring setup... 4.24 at 181! That's mid/high 7's in the quarter! Plus, it's a Mopar A-body! An article on the car before the record and before...

I have the SSBC A153 kit for my '68 Barracuda. Does anyone know if the conversion increases the track width over the stock 10" drums? Was planning on buying some new rims soon but I am worried they will affect my backspacing.

Ok, what front suspension options are possible (not necessarily available) for our A-bodies? I know there is various forms of the factory suspension from bone stock to tubular control arms w/coilover conversions. Then, there is Magnum Force and the HDK bolt-in K-members with their aftermarket...

Might be making a big move (1800 miles) soon so trying to figure out what to do. If I do, I have to find a way to get my '68 Barracuda there. I don't have a driveshaft in the car so that isn't an issue. Would towing it behind my Dakota, on a dolly, adversely affect the Strange S60 Dana rear end...

With the old software, if I visited the website, left and then returned, all topics would be shown as if they had been read except for new ones since I left. Now, that doesn't happen any more. So, how do I "mark topics as read" without clicking on every single topic?

These came on the '68 Cuda I bought. They were bolted in the car but never driven on. Will come with all the hardware and they are black. Sorry, no box or instructions but these shouldn't be that hard to figure out. Specific fitment: 67-69 Barracuda/Valiant/Duster/Demon MFR161202 with 108"...

OK, I plead ignorance here as I have been a BB guy for the most part, and the search function won't pull up squat, so please don't hate on me! You would think info like this would stickied somewhere. Anyway, what are the differences between the '69 back vs '70+ A engines as far as the front...

Looking for some pre-'73 10" drum brake spindles. PM me with details if you have a set you will sell.

When going from my stock '69 Dart 9" drum spindles to 10" drum spindles will the 10" ball joints fit the existing control arms?

Does anyone repop the remote mirror bezel nut? I need one and can't seem to find them.

I just bought myself a really solid '69 Dart here recently and shouldn't be looking at other cars but, someone was selling my favorite style of A-body, a '68 Barracuda notchback, and I just couldn't resist going to look at it! Bad move on my part as I brought it home with me! :cheers::banghead...

I know this is an odd request but here it goes! Does anyone have a set of small bolt pattern wheels with ok tires that I could borrow to get my car transported from Phoenix to Tucson? The car has sat so long that the tires are completely dry rotted off the rims and I really hate to spend the...

Can the 9" drum hub be drilled to BBP? I tried searching but couldn't locate the info. Thanks.

As some may remember, I had to sell my '70 Duster since I didn't have the cash at the time to take care of it. Luckily, it went to a forum member here. Anyways, found me a nice little '69 Dart Custom. Paid more than I probably should have but you can't beat an AZ car for having a great body! I...

*** SOLD PENDING FUNDS *** I hate to do this but I am putting up my '70 Duster for sale. I will be changing jobs soon and need a more economical car to drive the hour to work and back. Plus, I just don't have the cash at this time to take care of this car the way I would like. I will try to...

Yep, armed security won't help save the kids at all. :roll: Man, walks into work, starts shooting, people flee to next door theater, an armed off-duty cop puts the dog done. Fatalities = O...

For those that don't know the story behind Tango Mike Mike here is a video explaining the incredible man, and his heroism, behind it's inspiration. 302 Found