Search results for query: *

Could someone post a picture of their head liner? I need to install one and was wondering if there are some fiberboard panels on the C pillar.Thanks

Are trunk lids for a 65 and 66 dart the same? If not what is different?.

Im trying to drop some weight on my 65 dart. I'd like to swap to a fiberglass front bumper. I found a company that sells 66 dart front bumpers and I wonder what the difference is between a 65 and 66 dart front bumper?

Will a 65 barracuda front clip bolt on to a 65 dart body? If so will the body lines match? I want to drop some weight on my dart by adding fiberglass body panels and no one makes fenders and front valance for early darts. Barracudas I can find. Thanks

I want to put the candycane trim back on my 65, most of the clips are wasted. Where can I get replacements?

How do I find out the build date on my 65 Dart?

The brake lights on my 65dart have the inner lenses with the pot metal D shaped bezel in the center. the studs are snapped off and my tail lights look crappy without them. I have the pieces but wonder what's the best way to repair them? Keep in mind it a race only car and its way too ugly for...

To anyone using the hooker 5208 fenderwell exit headers, what plug wires are you using?

I seem to have lost the set screw/ bolt that threads into the steering knuckle of the steering column at the steering box. anyone know what size and thread pitch it is? This is on a 65 dart. Thanks

I just had the windshield replaced in my 65 Dart. Luckily I saved my original gasket but the lock trim is in bad shape. Where do I get one?

I didn't have time to rebuild the 440 and trans so I threw this 360 together with spare crap I had laying around. Wife won't be running her duster this year so I needed to rush and get this thing together. Just need to rewire the alternator, throw in a center section, make a drive shaft and have...

Which way? numbers readable from sitting in the car or outward so that it's legible while standing outside the car with the door open.

I'm boltig my 65 back together and noticed that half the radiator is behind the front valance blocking airflow. I'm wondering if maybe I should open up a big *** hole to allow more airflow. I doubt I'll be putting the front bumper back on to free up weight.

How far to the passenger side does a V8 sit? I have 33" width from the outside of the frame rails and the center of my water pump is sitting at 16" from the passenger side rail.

Long story short I pulled my 440 out of my 65 Dart and swapped in a 360. I need the rubber mount and the trans mount has me baffled. I'm using a 727 trans and the tail shaft is smashed up into the the floor pan support above the trans crossmember. The trans mount looks like it's too tall. ANyone...

I'm ready to order my headliner for my 65 Dart, I have the bows from a parts car and thats about it. Are there any other parts besides the bows needed to put it in?

I'm rewiring my 65 Dart and for the life of me can't find the switch. Did these cars come with 4 way flashers?

cage is in, rear end is narrowed. Just need to order my door bar swing out kit and a wiring kit. I won't have it ready next year but hopfully the year after. Yup, those were rust free Arizona inner fenderwells. I'll finish cutting them out and the fenders will mount to the J bars as will...

Can a headliner be successfully installed without removing the rear window?

Has anyone ever attempted it? Where exactly are the tight or didn't fit spots?

Did early A Darts have cardboard cut outs in the C pillar area where the dome lights go? How far down does the headliner hang from the roof skin? Can someone post pics of their headliners please? Thanks

If you consider primer grey as a color Sort of

I'm trying to get the engine location right in my 65. Roughly how high does the oil pan sit above the K frame? I'm using a 360 with the stock pan. Thanks

Who has used them on their early A? What did you think of them?

Will later A body tie rod ends work on an early A? I'm using later spindles but my main concern is will they fit into the drag link.

Is there a difference in mounts between the slanty and v8 trans? I'm trying to install a 727 and the mount seems a bit too tall and my tail shaft will not fit into the floor pan cross member. Also if anyone has any pic of their motor mounts in could you please post them up?

Anybody use a later (from a 73) A body gas pedal in an early A?

Is a 65 Dart and 66 Dart the same width between the frame rails? Inner fenders the same? Thanks.

For those early A parts? Doesn't seem like most vendors are early A friendly. So far I use e-bay and mopar forums.