Search results for query: *

Someone please tell me what size/spline On power gear box? Tried u joint 5/8 36 spline....too small? 11/16. 36 spline too big? Wtf? Thanks, Dave

65 Dart magnum 5.2, 4spd , 72 dart ex. Manifolds. Trying to find dual down pipes to begin fab. Had flex pipes previous to get car drivable. Now retro fitting 64 powersteering box/pump.locating pump under battery tray. Anyone know somewhere to get something for starting point without spending...

Maybe re hashing old threads but before a fab a cast driverside manifold for my 65 Dart magnum. Wanna now any other options oth than 340 manifold ($) with not much better flow than 273 dinky set up. Compared to the PS that I found thru Dorman that's huge. Thanks Dave

Before I start internetting.... Is there any adjustments on these gearboxes? Lotta play before turning...in my eyes anyway. Thanks, Dave

The reveal of "Franken Dart"...lol. Gotta spruce up front suspension. Finish up rear disc brake/E- brake fab. /6 5.2 magnum swap/ 4spd.swap went well. 273 ex. Manifolds for now. Header option seems like no hope Except hydraulic clutch slave in future. Will not use fenderwell on convertible...

Until I find affordable or maybe not... 1/2" chrome crap from autozone. Better than nothing in my eyes. 3/4" more factorylike but impossible To bend. Little heat gun settle in. Good to go...lol

65 dart. Final assembly. Passenger seat inner back stud needs Extension 1/2" or so... Tell me not crazy. Seats supposedly out of 64 dart????? Either way gonna make it work but wondering.... D.

Searching for affordable places/options to buy new boot.(other than the ads on site) For less than the cost of a new top....LOL Thanks, Dave

Anyone modify these, or any other ,shorty "headers" to work with 5.2 magnum w/stock 4spd set up? Thanks in advance, Dave

I will say it seems like there's more people Reviving these early a cars recently. I think that's totally awesome Including myself. When I got my 65 convertible Dart Project 4speed Magnum swap last year, at the time didnt think I'd be into it like 67 up cars.It's been growing on me. And most...

Just got car on all 4's. Magnum 4spd swap. 1st man/steering project(maybe last) Drove around parking lot realized not much radius. Checked underneath, no interference on v8 link,front disc setup etc. Don't look like more than 45-50 degrees either way? Normal? Thanks, Dave

Not that it matters to anyone here but it matters to me this is my last I promise. Magnum swap 4spd. early a floor pans left framerail etc.,customized metal all around and from this point on I will only be getting Mopars where I need to do body work and engine work and that's it. My body is...

Thanks to 65dartman and whitepunkonnitro members help. 65 Dart vert /6 convert to magnum 5.2 roller rocker small block beefed up low end. Carbureted, 100 shot nitrous ,833 4spd swap. Going for virgin ride manana snow or not. 18months resurecting basically a junked car. all disc brake set up...

Probably beating a dead horse but cant bleed pedal going to dual reservoir disc brake all four. Either MC junk or I should quit hobby...... Bled MC. Bled each line 50 times. No pedal unless pump a few times. Even bled each 1/2 of MC at a time???? Was told stock single pot MC brake rod...

Got 5.2 Magnum /833 4 speed drivetrain in cant get clutch adjusted to release disc. I need a longer adjuster rod? Hopefully not wrong TO bearing...... Thanks in advance Dave

Was told only have 18 & 20 tooth speedo gear choice? Anyone have any other options? Dave

Feel stupid/ Dimentia maybe...LOL Started to break in cam open pipes. Ran good. Didnt have time light on. Had float issues with electric fuel pump,got that fixed. Went to start again today to finish break in.... no spark...WTF. Checked all wiring from starter relay,fusible link, ballast...

Between oil filter and torsion bar, steering link, and 4spd bell cast. No where for exhaust??????? Have temp 2 1/8" flex pipe tack welded to manifold. All I can figure is use a 90* pipe fitting off manifold but still will interefer with oil filter, with or without adapter? need remote filter...

Got motor trans in today,not easy. Steering link hitting 360 LA oil pan slightly??? Could ding oil pan slightly?? Had engine 4spd trans 12 feet off ground pulling trans tail down with rope to eventually get in...WHEEEEh Thanks, Dave

Bought an aftermarket 2 canister master cylinder and went with four disc brake setup. I bled all the brakes ran all new lines no leaks and still got no pedal,without a couple pumps. Do I need a longer MC rod, I would imagine, I'm just asking. thanks Dave

Can I use these 91 exhaust manifolds with a 4-speed conversion with manual steering 65 Dart/vert? Also possible header advice/options? Thanks in advance. Dave

Im an automatic guy.First and last early a 4-speed trans checking gears. Took cover off just to check please let me know your expertise thank you. Shifter seem to work fine I'm just worried about the trunnion rear tail bearing seems to have a little play is that normal.? Is it something that I...

Like it or not, I do. last minute thread, thought I'd show. Cant stand stock gas cap set up on Early A. I guess I am severely biased toward 67- 69 Barracudas. Did this on my 69 Dart in the past. My 65 Dart vert was hit on driverside, got this panel from a member here, to start repairs. Long way...

Have trunnion yoke conversion and a driveshaft with bigger diameter than stock but not as long as stock. (to 7/1/4 rear) Just wondering if someone has approx. measurement to see if length I have (52.5") un stretched, is usable, long enough to cut? Thanks, Dave

Bought us tool kit. rear brackets are no where near existing frame rail holes? do i redrill and forget that or use existing frame rail holes to convert? Thanks . you got 1 hour, and it wont matter. LOL

Header options? Not doing this without headers. First small block ever. If I have only fender well option,might as well Do big block. Block huggers? Anybody? Thanks, Dave

Hi, What oil pan do I need for swap in 65 Dart. This pan obviously will hit steering assembly. Thanks in advance. Dave

Have a possibilty of getting shortblock crate 360 for 65 dart, w/ 4spd bell 10.5 clutch. Original plan was 318 magnum have somewhat ready to go. Imagine bell would fit but what about flywheel to match un balanced 360? is it a matter of just getting weighted flywheel? Please expand, been a auto...

any one done this b4? What can be substitute be fabbed to work? If so which? Currently stalled on project. Thanks, Dave

what's difference between 65 dart vs 67 up rear diff. Specs? If any. Thanks, Dave