Search results for query: *

This year I had converted my 3 speed auto to a standard. It's September and time for me to go for an inspection. Here's what I'm wondering...did a '70 Dart come stock with a clutch safety switch, and if it didn't, does this mean they must overlook this during inspection? Thanks! Craig

Might as well ask now that it's getting near the date...anyone up here in the Northeast going?

So I've read in the directions that you bypass the ballast...so I'm assuming that you just disconnect the wires from the ballast and splice em together...am I correct on this? Just don't want any wires burning up if I do this... I have the PerTronix distributor with the ignition II as well as...

Anyone know where I can get a set for 2 1/2" exhaust, Summit only has it for 3"-3 1/2" Thanks! Craig

Was wondering if anyone had this setup in the rear: I was wondering if this would work with this parking brake setup... http://www.summitracing.com/parts/WIL-330-9371/ Any help is appreciated! Thanks, Craig

Well, I guess you can call me an idiot for finding this out now, but I went to make sure that the reverse switch was tight and it wasn't...because I soon found out that the threads have been stripped. Here's what the damage looks like... Is there some kind of solution to this or am I kinda...

Okay, so I decided to take the leap and get TTI headers. Along with this, I also did a 4 speed conversion. With all these variables changing, I was prepared for something not to fit...well...it "fits" but man is it a tight fit! I knew the z-bar had to be modified (of course for the amount of...

I was wondering if anyone had pics of their shifter installed without the boot on...I feel like the shifter box is a little too far back when I did my install but would like something to go by for a reference. I appreciate it! Craig

What does this look like? Does it even work or will it hit the dash? Just wondering what it looks like installed compared to the 71+ style? If this is in another thread, my apologies, I did make an effort to look though! Thanks! Craig

Was wondering if the input shaft on an A833 tranny was supposed to have any play...if it does how much? If it's not, what would cause it? Thanks! Craig

Alright, so I've gone through my second oil pan after hitting unexpected dips in the road. With the Alter-K setup I have, I need a rear sump to clear the rack and pinion...I currently have the 9" deep Mopar rear sump pan now...I was looking at Moroso but those seem to be 8.125" deep...does...

At least I leave it at photoshop, haha

Okay, so during my search for a bellhousing...I have come across many with the casting number 3743859... http://www.mymopar.com/bellhousingcastnumb.htm ^according to there, this bellhousing is for 10.5" or 11" clutches...also for an E-Body...BUT...will this also fit in an A-Body or will I run...

I figured I'd come here for an expert opinion...do you think this is a fair price? and I've heard that there maybe differences in pedal assemblies between the years described as fitting in the ad? Just want to make sure this will work on my '70 Dart...

I was looking at hoods and I came across the SRT style on this page: http://www.carhoods.com/ Would it look stupid on a '70 Dart?

I've been trying to fix this electric problem for a while now. I had recently gotten a 100 amp alternator because my old 65 amp had failed and I have a few things that demand more electricity in the car. Well, for some reason recently, the maxifuse I had installed to bypass the fusable link had...

Alright, here's my current battle. I just recently got a 100 amp alternator because I have more electrically demanding things in my car. The alternator is putting out roughly 13.8 volts...the battery however is putting out 12.3 with lights/radio on. I just replaced the battery with no success in...

Quick question...on the plug for the headlights, there are 3 sets of wires, black, red, and purple...is it safe to say that black is the ground, red is for low beam, and purple is for high beam? The reason I ask is because the lights I have don't have high beam and only have a red and black wire...

Anyone in the area going to this tomorrow?

Sorry if I'm beating a dead horse and someone posted this already! Anyways, 2,800 lb leaf springs vs. 3,200 lb leafs...is 3,200 lb going to jack up the rear of my car significantly more then the 2,800 lb? Do I not know what I'm talking about at all? Someone school me! The leafs on my car now...

Okay, I'm kinda new to the whole tuning thing and what changes do what to the engine...mainly because I was satisfied with a stock 360. At the track though, I noticed I lose a lot of power high end, and from what I understand a carb spacer helps out in this area? This is what I'm dealing...

I decided to go with the TruTrac and am going to install it back in the Dart today...I have heard pros and cons about using synthetic oil with this type of rearend (because of the fact that it doesn't have clutches). Does anyone have this diff and run synthetic? I was planning on running RP...

In my quest for knowledge, I went to youtube and found this...was kinda interesting and gave a REALLY good explanation on how differentials work...thought it was kinda cool so I thought I'd share it, the beginning is slow so start it at 1:50... YouTube- How Differential Gear works (BEST Tutorial)

Well, went dragracing a few weeks ago and going down the track, felt weird, as if I was loosing tracking as soon as I stepped on the gas....and believe me, it wasn't because my car is full of horsepower...I'm guessing the posi went in it. Anyways, felt normal otherwise until I went to turn, then...

...for an abody yet? I'm willing to pay for someone who may have already made them in the past or can make some new ones. I'm no welder and if someone has created a bracket that is sure to fit, I am very interested... Thanks! Craig

Anyone have any pics of their A-Body with HID lights? Curious how they look, and also list what kit you bought! I'm thinking of doing an HID conversion, the stock lights just aren't bright enough... Thanks! Craig

was looking on craigslist...seems kinda cheap...idk about the flairs but seems kinda cool... http://boston.craigslist.org/nos/cto/1650356762.html

I've been desperately trying to find a CAD assembly of a 5.7 Hemi engine...this may be a long shot (and I'm pretty sure it is) but does anyone know where I can find one? Thanks! Craig

Has anyone made these yet? Wondering how you did it or if anyone would be willing to sell a pair? I've got some Sebring seats I planned on putting in the Dart, but I'm not much of a fabricator...

Took some time to take some fall foliage pics with the Dart, anyone else take any fall/abody pics before the winter ruins our fun?