Search results for query: *

Ive got a blown head gasket. I Pulled the valve cover and 5he underside was like sludge. Like green snot. I can only assume the entireally engine is like this. How can I flush it out after repair?

I have a what looks yo be a 187 oil pan. It is turquoise. But there is no number stamped in it. Its notched like the 187 but the sump seems slightly bigger.any idea what this would be from? I can find no,numbers anywhere

Maybe this is possible and maybe yall have come across this. Im looking to insure my Scamp. I have full coverage on my daily cars. Id like a company that can add in the classic car with my 2 daily drivers for 1 monthly bill? For the Scamp Id like an agreed upon value.

Im sure some of these are no brainers. Winding down 4 year long build. My first attempt at a build. Im running into problems I should have for seen. These are just a few things I ran into. I sure some of you all have more to add. Bag and tag everything. Every screw, bolt everything! Have...

Getting set to assemble my scamp. I did bag and tag most stuff. Just curious as to assortment of screw sizes i might need for things interior and exterior? I would like to buy an assortment to have on hand.

Just did an oil change on my 97 5.9 dodge ram a few days ago. Today was in town and the oil pressure gauge was bouncing. Its leaking oil around the filter. I pulled the filter and there was some kind of plate or adapter or something behind the filter that was loose what is this? I did tighten it...

Noticed my scamp after warmed up when I shut it off its hard starting again. It will crank ok and sputter a few times before firing. Kinda new at this so not sure where to look or what to look for. Fuel system is dead headed fuel pump dual carb but no return. Maybe after some Q ad A I can...

Resurrection complete! I went all Silver since my bumper is painted needed some shine on the front. Hows it look?

So ive never been though this. Obviously I want to check the fluids and such anything else I need to do before I fire it up after a few months?

Shopping for a good ol pick up. Something to have around to haul stuff. Not wanting a payment so staying in the 3,000 range. Never owned a Ram truck thoughts? Im aware of the truck site. Not much activity and not really wanting to sign up...

Some of you know I work for a college. They have a automotive restoration program. Today first day of school and this is here? I believe its a 71 Dart but it looks rather odd in spots.

J/K of course. Rob gave me some tuning tips and even reminded me to plug the vacuum ports on the carbs. So after adjusting Initial timing and plugging the. I could tell just by idle it was running better! Well took it for a short drive to test. Barely got on it and broke the welds on the...

Very close to driving for the first time since Ive owned my scamp. Pretty much total resto...Check list for first test drive? Things to check and double check ect..ect.?

Has anyone bought or have first hand knowledge of any of the companies selling custom driveshafts on Ebay? No local shop to provide such service. The prices are right and seems like they are using good parts!

Run down i have a 440 with mallory dist, MSD box and coil. I got it all broke in new motor. Now! I made my marks on my balancer per the Math that Tony helped me with. All i did was set the inital and stab the dist when installed. So at 3000RPM timing light on #1 cyl my timing marks that were...

Well it runs! Got some issues. Scott was right the top radiator hose those things are junk. 2x its blown off during break in. http://youtu.be/5RZHetQJ8bc

Well today was the day to fire the scamp! It didnt happen! Turns out the MSD Street fire box i bought used is bad. Just my luck. Someone wanna loan me $100 for a new one lol. Just frusterated. Would it be best to buy new or send for repair never used MSD for repair so unsure of the cost. new box...

So I broke a valve cover bolt off in the head. So I went out and bought a screw extractor and followed the instructions. But.... now I have a broken screw extractor. its down below the head so cant weld to it. Ive tried... using a chisel to break it up no luck. Anyone got any ideas? Thinking...

Anyone have a photo of there wiper linkge intact? in car... I just installed my wiper motor on my build and i think my linkage is either bound up or installed wrong. The motor works but with the linkage hooked up it wont move.

I have quick question regarding the transmission dipstick tube. I just installed my oil dipstick and want to put the trans one in. I noticed it just kinda slips right in and bolts to the bell housing. Is there anything else that holds it in?

Shopping for an oil pressure switch for my 440. I see a million different types when I search. Im looking for one for aftermarket 3 gauge set. Anyone know the right part number?

I have a 1995 Dodge intrepid with a check engine light. I went to the parts store to have it checked and there OBDI connector was different then the one in the car. The one in the car i found is inside between the steering column and center console. Blue 2 rows 3 male blades. The guy the counter...

What is the proper way to adjust rockers in an adjustable setup? My book doesnt show it and the videos on you tube are hyd cams?

Anyone got any good tips or tricks on how to roll the rear wheel well lip?

Got my engine block, crank and parts back from machine.. 440 in case your wondering. What next? Do I go into cleaning and assembling? Ive got, torque specs, sequences wrote down. Cleanances to check and tolerances. Using Lubriplate grease is this ok? Only doing short block for now. Any tips and...

What products have you guys used? I know VHT and POR15 seem to make good products. Just wonder what you guys have used with success.

Looking at the sale ads seen a Damper for a BigBlock. Though google im not able to find much info on them. Looks to be Doug Fisher Dampers or Fisher Dampers. Any of you out there ever hear of this brand or used and have feedback?

shopping for a rear main seal kit. I see the standard rubber and the vitron seals. Whats the benefit and is spending the extra coin worth it?

I have a Pro Stick shifter. Can these be mounted anywhere on the hump or is there a certain spot they need to be?

Ok I cant remember where and how the factory fuse box goes in and where. On my 72 Scamp. Can someone please help me? I need a photo of location and how installed please.