waggin
moving on ain't easy if you drive a Ford :p
the cast blast cast iron engine paint looks awesome on the parts that are cast iron.
1970 Dart GT - A day in the life
- Thread starter 7071DartGTReg
- Start date
-
OK everybody!
The Disc Brake upgrade is underway. I have started a separate thread for this with pictures and everything. So I won't be posting the pics on this thread too to save FABO some space. Check it out for me and give me some feedback on it please.
http://www.forabodiesonly.com/mopar/showthread.php?p=826063&posted=1#post826063
Later,
Bruce B.
The Disc Brake upgrade is underway. I have started a separate thread for this with pictures and everything. So I won't be posting the pics on this thread too to save FABO some space. Check it out for me and give me some feedback on it please.
http://www.forabodiesonly.com/mopar/showthread.php?p=826063&posted=1#post826063
Later,
Bruce B.
Here ya go Randy:
And for everybody else; This was my solution for mounting my '70 Dart GT's Sway Bar without Sway Bar Lower Control Arms. I also think it will clear the Calipers for the Disc Brakes.
Hope this helps,
Later,
Bruce B.
And for everybody else; This was my solution for mounting my '70 Dart GT's Sway Bar without Sway Bar Lower Control Arms. I also think it will clear the Calipers for the Disc Brakes.
Hope this helps,
Later,
Bruce B.
Here is the completion of the Disc Brake Conversion....
Passenger Side.....
Drivers Side......
I also replaced the Upper Ball Joints, Lower Ball Joints, Upper Control Arm Bushings, Brake Pads, and oh yeah... Both the #$%^& Caliper Bleed Screws... UGH!!
Gonna get new Sway Bar Link Kit and Lower Control Arm Bumpers tommorow.
For the complete Disc Brake Conversion thread go here:
http://www.forabodiesonly.com/mopar/showthread.php?p=890949#post890949
Here they are!! 1978 Magnum 500's with Firestone Firehawk 215 70 R/14's all around.
I still need new Centercaps and repaint the Magnums.
I will post better pics of the car with them tommorow.
My friend George (now FABO Member 318dart) stopped by to wrench!! THANK-YOU George!! :supz:
Later,
Bruce B.
Passenger Side.....
Drivers Side......
I also replaced the Upper Ball Joints, Lower Ball Joints, Upper Control Arm Bushings, Brake Pads, and oh yeah... Both the #$%^& Caliper Bleed Screws... UGH!!
Gonna get new Sway Bar Link Kit and Lower Control Arm Bumpers tommorow.
For the complete Disc Brake Conversion thread go here:
http://www.forabodiesonly.com/mopar/showthread.php?p=890949#post890949
Here they are!! 1978 Magnum 500's with Firestone Firehawk 215 70 R/14's all around.
I still need new Centercaps and repaint the Magnums.
I will post better pics of the car with them tommorow.
My friend George (now FABO Member 318dart) stopped by to wrench!! THANK-YOU George!! :supz:
Later,
Bruce B.
Just a couple more pics....
Later,
Bruce B.
Later,
Bruce B.
dusted72
Thanks Hemiroid!!!!
Man Bruce she even looks good just sitting there. Keep it up. Oh and it looks like she could use a bath.
Ya think? LOL
It has been 2 years since she has been washed.... lotsa mold...
Even the Glass is green.
Gonna scrub her down tommorow.
Later,
Bruce B.
pettybludart
Well-Known Member
So Bruce did you get her cleaned up?Time to start wrenchin on er!:clock::toothy10:
Yeah I did......
But she needs a bath again.
Dr. Waggin is gonna come pick her up in a couple months or so......
Later,
Bruce B.
But she needs a bath again.
Dr. Waggin is gonna come pick her up in a couple months or so......
Later,
Bruce B.
67 prostreet gt
Well-Known Member
Updates ?????
74DartSwinger360
The Brat Pack
Sadly if you read the admin note at the bottom of his last post you will see why no updates
67 prostreet gt
Well-Known Member
And he is. I really only knew him through FABO, but I did talk to him by phone on a few occasions about my pair of GT's. Bruce was one of the foremost experts on all things 70/71 GT, and a heck of nice guy too.
Wasn't his GT purchased by another member though?
-
