'67 Barracuda finally has paint!

-
We finally got the motor in today. I highly recommend installing it from underneath, although lifting the front end of the car up was nerve-wracking. There's still a lot of little things to do, but it's a great feeling to get this far.

Scott
 

Attachments

It's finally on the ground and out of the garage for its maiden voyage. No windshield yet, so it was a slow drive around the neighborhood. It was a success overall - I need to change the master cylinder and the Borla mufflers are VERY loud - but it sounds great and has severe traction problems \\:D/
 

Attachments

Scott that looks beautiful! I wonder if the engine/tranny install could be done like that with a vert?? What paint color/code is that?? Great work!
 
Scott that looks beautiful! I wonder if the engine/tranny install could be done like that with a vert?? What paint color/code is that?? Great work!

Thanks man! Pretty sure you can install the engine and trans like that on any A-body. Color is Lexus Matador Red Mica. It's a three stage paint and therefore a pain to spray, but it really looks good in the sun.
 
Scott that looks beautiful! I wonder if the engine/tranny install could be done like that with a vert?? What paint color/code is that?? Great work!

Thanks man! Pretty sure you can install the engine and trans like that on any A-body. Color is Lexus Matador Red Mica. It's a three stage paint and therefore a pain to spray, but it really looks good in the sun.

Great car! Great thread! Yes, all A bodies can take a drive line that way, I always do it from underneath as I despise removing hoods :(!

The colour is beautiful!

Looks a lot like mine - Modern Ford Sangria Red Metallic.



Zeus
 
Sorry, it's my first try at uploading a video. Gotta turn the camera 90 degrees next time.


[ame]http://youtu.be/IKdyB59l744[/ame]
 
-
Back
Top Bottom