Need pics of 273 4 BBL choke

[Greasyfingers]

Bent the rod forward just a bit and readjusted the spring to the factory spec this morning. Fired it up and everything seems to be working the way it should. I have another month before it can be licensed, so no test drive.
Thanks for all the input.
Aaron

 

[pishta]

found these on my drive, unknown owner.

 

[toolmanmike]

found these on my drive, unknown owner.

View attachment 1715580604 View attachment 1715580605

Don't overlook the primary choke pull off. (The diaphragm on the right) it opens the choke just a bit as soon as the engine fires and starts producing vacuum. It is adjusted by bending the downward loop in the linkage.

 

[Greasyfingers]

That's exactly how I ended up bending the choke rod.

 

[Paul King]

Don't overlook the primary choke pull off. (The diaphragm on the right) it opens the choke just a bit as soon as the engine fires and starts producing vacuum. It is adjusted by bending the downward loop in the linkage.

Were can i purchase the choke

 

[4spdragtop]

Hey Paul, try here, I've purchased a few things. Good service AND price
Carburetor Parts Catalog| Mike's Carburetor Parts

Were can i purchase the choke

 

[Greasyfingers]

I bought mine years ago, when you could pick one up at the parts store. I do remember it was a Hygrade replacement part.

The only one I could find currently was at mopar mall and it is priced like it was made of gold.

 

[Paul King]

I bought mine years ago, when you could pick one up at the parts store. I do remember it was a Hygrade replacement part.

The only one I could find currently was at mopar mall and it is priced like it was made of gold.

Maybe i should go with an electric choke