Post your 12 second small block combos

[dragfish]

Specs on the engine? heads, cam, compression?

Thanks guys engine is a stock bore 1969 318 factory forged crank, rods and forged Ross pistons zero decked .508 cam 292 speedmaster airgap intake with 700 dbl pump holley has 1 5/8 hookers with a 4500 501 converter 904 trans and a 3.21 rear running through flowmaster super 50's muffs.converter is set up for 4.10 gear. we have 1.6 ratio rockers as our next up grade then 4.10 gears. heads were done by KG engines 587 casting cnc 202 160 ferrera valves these heads flow up to 275 cfm according to Dave at KG engines. As for compression im guessing 10.5. We have a 26" drag radial slick outback.It ET at 103.37 mph

 

[Rick Covalt]

Slant 6 - 65 Valiant - 12.70 @ 104.6 mph
Engine is .084 Over , 11.5 to 1,Molnar rods with Wiesco pistons
Mike Jeffrey Head, Cam is @ .550/.570., 264 @.050, 3X2 barrel Webers
904 with 4000 stall, 4.30 rear gears, MT drag radials.
Car weighs @ 2850 with me in it.