Post your Small block sound bites

-

Oldschoolcuda

Early-A Body Nerd
Joined
Mar 24, 2008
Messages
5,454
Reaction score
3,568
Location
Chesapeake, Va
Small blocks unite. All this boat anchor talk is comical. Every small block is worthy. Anybody can talk but who actually has what. Post up your build info. and your SB sound bites. I'll start with my 340.
71 block .030 over, stock crank, SCAT rods, TRW forged pistons,cloyes roller,lunati voodoo cam, indy la-x heads,eddy performer rpm and 800cfm carb and hooker super comps. Turn up and enjoy,don't think my neighbors did. [ame="http://video.yahoo.com/watch/7275094/18979914"]sounds of small block 2 on Yahoo! Video[/ame]

Oldschoolcuda
 
Thanks but I don't mind double dipping.
[ame="http://video.yahoo.com/watch/5088958/13507243"]little guy nationals on Yahoo! Video[/ame]

Oldschoolcuda
 
Thanks but I don't mind double dipping.

Oldschoolcuda

Thats cool. I don't have one of my car at idle. Will have to get one before I do a rebuild. But I do have this. I think she sounds pretty good for a stock 340.

[ame="http://www.youtube.com/watch?v=LvDr8TnCYMg"]YouTube - 1970 Dodge Dart swinger burnout[/ame]

[ame="http://www.youtube.com/watch?v=pAN5zUfd8Oc"]YouTube - 1970 Dodge Dart Swinger 340 burnout[/ame]
 

422" pump gas, still on running stand.

[ame="http://www.youtube.com/watch?v=j0q0FJW4LcU"]YouTube - 422"[/ame]
 
410, open headers, again, on stand
[ame="http://www.youtube.com/watch?v=sfmeoKfWCP4"]YouTube - 410" - open headers[/ame]
 
67 cuda' Fastback

.030 over 360 10:7 compression
KB forged pistons
Holley 750 HP mechanical secondaries
Performer intake
CompCam Roller Rockers
Tru roller timing chain
.474/.474 MP cam
Milodon oil pan
TTI headers with X-pipe, Dynomax Ultras
Accel 300+ ignition with rev limiter
4-Speed with McLeod clutch/PresPlate
489 Case 8.3/4 Suregrip with 3.55 gears
Yukon axles/Green bearings
KYB shocks
Electric Fan
March pullies
AutoMeter MCX 5" gauges
Electric trunk release
Pistol Grip shifter

[ame="http://www.youtube.com/watch?v=TYdeKPIzHt4"]YouTube - Cuda with Dynomax Ultras "welded"[/ame]
 
Here's all the sound I've got right now

1967 'Cuda Fastback
360 bored +.060
Eddy Performer RPM Alum. heads
Eddy Alum. Performer RPM Air Gap intake
Comp. XE 284 hyd. cam with flat tappets and roller rockers
8.5-9.0 comp. ratio (set up to run on 87 octane)
Stock 360 c.i. exhaust manifolds (do not care for headers)
TTI 2-1/2" exhaust pipes with "H" pipe and Dynomax Super Turbo mufflers
2800-3200 convertor
MSD 6AL ignition system with an MSD dizzy
Quick Fuel 650 cfm double pumper four barrel carb

[ame="http://www.youtube.com/watch?v=7jaEu5O9zWU&feature=player_embedded"]YouTube - 0622001853.3g2[/ame]
 
-
Back
Top Bottom