GTXperience
Orig Stealth Mod
Since I have had a couple of people ask to see pics of my STR12 that is going on the 408, here are a few shots. Thanks to memike for resizing them for me.
GTX.
That is nice. How much HP is your 408 making to need that?
You will have to keep us posted on this one.
I've been looking for one--- what is generally considered their current value?
you lucky dog you, maybe i can find one of those one day i those things:cheers:
Cross rams look soooo cool=P~ Wanna trade for a new tunnel ram :toothy10:
what carbs are you gonna run? 2 eddy 500's? 2 holleys?
if you hate it, i'll trade you an air gap and a trip to the massage parlor around the corner.
I was thinking of using a pair of 500's but am now thinking of trying a pair of Holley 660 center squirters.
Re: your offer. I just asked Joyce if that would be ok. Her exact words, "I don't know what an air gap is but you better not be thinking about going to a massage parlor in Oakland. Who offered this? Was it that Steve guy who has the shop in Oakland?" I replied, "Yes, that was Steve from Oakland and ... I think he'll pay for a massage parlor nearby here too - it doesn't have to be in Oakland."
Steve, I think you have one dirty look coming your way when we drive down to Spring Fling. ;-)
dirty look?:scratch: c'mon, they've only been raided 3 times and they even offer happy endings:cheers:...................
seriously though ben, the holleys might run good too. i have 1 or 2 holley 600 cores if you want.
Gonna have this engine at Spring Fling? Gotta see it when it's done. XRams are sooooo cool.I was thinking of using a pair of 500's but am now thinking of trying a pair of Holley 660 center squirters.
Re: your offer. I just asked Joyce if that would be ok. Her exact words, "I don't know what an air gap is but you better not be thinking about going to a massage parlor in Oakland. Who offered this? Was it that Steve guy who has the shop in Oakland?" I replied, "Yes, that was Steve from Oakland and ... I think he'll pay for a massage parlor nearby here too - it doesn't have to be in Oakland."
Steve, I think you have one dirty look coming your way when we drive down to Spring Fling. ;-)
Gonna have this engine at Spring Fling? Gotta see it when it's done. XRams are sooooo cool.
I've also wanted one of these intakes for quite a while being familiar with them back in the day. So I've been busy trying to get Edelbrock to start making them again. It's not out of the realm of possibility, the key of course is demand. Since FABO has lots of Small Block guys who like the cool factor it could make a difference. A phone call to Edelbrock a letter here or there.
Here's one of my current efforts. These guys have contacts through out Mopardom.
http://www.moparmax.com/departments/letters/iii_3-letters-2.html
means hundreds a year sold. We would have better luck with a LD340 intake."substantial"