Stop in for a cup of coffee

[zkx14]

Keefer I still might have one of the motors and plate, you will lose a 6x9 though and still need the center moulding and duct.

I don't have anything back there now. Just a flat shelf, nothing opened up. Should have thought about it before a reworked the harness under the carpet. Don't think there was an extra wire in there for it...

 

[halifaxhops]

My package tray had the vented cut out made into it.. They also served to hide the speakers. If you had rear defrost, you only had one rear speaker.. W/O defrost, you could have two.. This is on 68 B Body..

That first photo was a "adapter" I guess so you could still have two, pulled it out of a Newport. Had to mod the trunk spring support a touch to fit it in the dart.

 

[halifaxhops]

I don't have anything back there now. Just a flat shelf, nothing opened up. Should have thought about it before a reworked the harness under the carpet. Don't think there was an extra wire in there for it...

Pretty sure it is just a power wire the switch has the resistor in it if I remember, just a plug on each end.

 

[halifaxhops]

Hardest thing to find is the escutcheon and the vent, pretty sure they are all the same size. mine is metal and just painted it.

 

[dukeboy440]

soo how's this for my first try

 

[zkx14]

Pretty sure it is just a power wire the switch has the resistor in it if I remember, just a plug on each end.

Yeh, I would guess one wire through the harness under carpet. They almost always use body for ground

 

[halifaxhops]

I think mine might have had the wire run, prob a SE thing.

 

[halifaxhops]

Nice Chris kinda 3Dish.

 

[dukeboy440]

Nice Chris kinda 3Dish.

its not where near daves work lol but I'm learning

 

[zkx14]

soo how's this for my first try

View attachment 1715005642

raise the car enough to break the horizontal line over the roof.

 

[halifaxhops]

Little Dave!

 

[dukeboy440]

Little Dave!

HAHAHAHA not even to that level, took me 3.5 hours to figure out how to change the dang color lol

 

[zkx14]

I think mine might have had the wire run, prob a SE thing.

It might be there. I added a wire for third brake light, but everything else I left alone.

 

[halifaxhops]

He is definitely a artist with doing that.

 

[halifaxhops]

It might be there. I added a wire for third brake light, but everything else I left alone.

There will be a female single spade plug on a wire around 2' long on the drivers side by the seat support.

 

[zkx14]

anybody doing anything useful today? or just staying warm?

 

[dukeboy440]

hehe i have new toys

 

[MOPARMITCH]

anybody doing anything useful today? or just staying warm?

Headed out to the Shop now to Smoke.. and watch Football Pregame....

 

[halifaxhops]

I might go to the commissary in Carlisle and do the monthly load up. At least the car get hot. I should take a pic of the shop, kind of full, the Chicken is on the lift, the pop under it, rons frame is on the other side then the hood in work, then the tractor and Stans kids atv and of course the new parts washer! Hey adds are misleading it said 20 gallon it is twenty filled to the rim usable 6 gallon.

 

[halifaxhops]

Hey Mitch the oil eater works great in there.

 

[CudaChick1968]

Here's a funny from Leanna.


A fun one from the Memory Vault!!
Sven and Ole worked together in a Minnesota factory, and both were laid off. They went to the Unemployment Office together.
When asked his occupation, Ole said, "Panty Stitcher -- I sew da elastic onto da ladies' cotton panties."
The clerk looked up Panty Stitcher. Finding it classified as unskilled labor, she gave Ole $300 a week in unemployment compensation.
Sven, when asked his occupation replied, "Diesel Fitter."
The clerk looked up Diesel Fitter and it was classified as a skilled job, so the clerk gave Sven $600 a week in unemployment compensation.
When Ole found this out, he was furious! He stormed back into the office demanding why his friend and co-worker was collecting double his benefits.
The clerk explained, "Panty Stitchers are unskilled labor and Diesel Fitters are skilled labor."
"Vot skill???? yelled Ole. "I sew da elastic on da panties. Sven puts dem over his head and says, "Yahhh, DIESEL FITTER."

It's just not the same without the photo Mike. LOL!!!!

 

[zkx14]

There will be a female single spade plug on a wire around 2' long on the drivers side by the seat support.

where is the resistor located?

 

[halifaxhops]

Missed that one.

 

[halifaxhops]

where is the resistor located?

In the switch I believe. Tell you the truth you just use it on high. There is a wire assy that goes to the switch power in ( I think a bullet connector to under the dash by the fuse block) then two wires and one out, google it you will find it.

 

[zkx14]

I might go to the commissary in Carlisle and do the monthly load up. At least the car get hot. I should take a pic of the shop, kind of full, the Chicken is on the lift, the pop under it, rons frame is on the other side then the hood in work, then the tractor and Stans kids atv and of course the new parts washer! Hey adds are misleading it said 20 gallon it is twenty filled to the rim usable 6 gallon.

does the lift have mechanical stop. Wouldn't trust it to park under if not.