Stop in for a cup of coffee

-

Thank you, but the shipping would be silly I believe, I have seen these sell at auction and retrieve good money :thumbsup:
If I was still doing that work, I would have taken it apart carefully and sold it.
Done it many times.
Young guys just cut them up and gone.
I understand it they had it down with a Sawzalll in about 15 minutes.
 
That dude is gonna go down as the "battleship hunter", he found 3 warships that no one else had been able to locate in 70+ years.....
 
So I started to mention this yesterday, Engine masters did a dyno test of air filter/baseplate/lid trials. They had some very shocking results. the best combo they had was a cheap stainless steel salad bowl that they cut the bottom out of and put a K&N lid on it.
 
Something I learned from Joel. I was there in the Spring and there was mud everywhere but we were walking on plastic. I asked what it was and he said bedliners. You can get them for free a lot of the times. I have them everywhere now. The tailgate liner is great to throw down if you need to slide under your car. I have several now.
 
No appointments today, guess its a good time to clean up a little.
Work on feng shui in the shop.
Oh, forgot, snow clearing today. I hate snow.

Drove my buddy to work at the parts store yesterday,pushed the snow on the parking lot. I ordered a couple new dustpans for the shop,and he gave them to me. Real solid steel dustpans. Heirloom dustpans.
 
All original 63 dart convertable complete but floors are gone.
Slant auto buckets but no console. Any real value?
 
If I was still doing that work, I would have taken it apart carefully and sold it.
Done it many times.
Young guys just cut them up and gone.
I understand it they had it down with a Sawzalll in about 15 minutes.
That's good to know.. At one time I was very interested what is up with architectural salvage in and around the city. Other places have businesses or non-profits or both. Here its like hit or miss, people do it for a bit or on the side.
As far as the railings go, of all the material from the demos around the corner from me, the railings went to a salvage guy.
I think a lot has to do with knowing what you have, how to take it without messing it up, and knowing where to find buyers. Like any specialty, without the right buyers, it may not be worth as much, or anything.
 
Glad I caught this.

The cage doesn't need to be grounded, it only needs to be conductive. Depending on the wavelengths you're interested in blocking, the mesh needs to be finer and all seams need to be more carefully made.

The cage works on the principle that no electric field can exist inside a region with equal potential. Since the conductive screen can be considered an infinite sea of electrons that eliminates any potential difference across its surface, no electric field can exist within.

At very high frequencies, an electric field can bulge in through the openings in the screen b/c the wavelength becomes smaller than the openings (wavelength in air @ 1 GHz is roughly one foot IIRC), thus decreasing required mesh size for higher desired blocking frequency.

/end EE rant
Interesting.
Lemme ask here then since we have you and several others who know electricity from theory and practical sides.
What happens when twisted audio wire is used for DC power?
If that's unclear, I'll get some photos.
 
Yes sir, I believe the attack happened at 7:46 a.m. or there about
Tried to find correct time..Some say 7:48 others 7:55? Either way that was after Noon here. Radio broadcast that it was happening till 2:22...
I knew some one would do something with my hard wood remark, better Hop's then Karl :rofl:
So you prefer Hoppy handle the wood?

I ordered a couple new dustpans for the shop,and he gave them to me. Real solid steel dustpans. Heirloom dustpans.
I very much prefer good metal ones, but never thought of them as heirlooms.
Interesting.
Lemme ask here then since we have you and several others who know electricity from theory and practical sides.
What happens when twisted audio wire is used for DC power?
If that's unclear, I'll get some photos.
for info on things that are twisted, I'd recommend you ask Wolfie or Hoppy.

Good Morning
 
-
Back
Top Bottom