Stop in for a cup of coffee

[Mopar Tim]

CAD drafters are in super high demand right now. To the point, companies are being forced to pay all time high rates.

I should have continued my studies in that field......O well.....

 

[Tooljunkie]

Time for a nap...

View attachment 1715454403

That’s me. Except im alone. And talking with myself...

 

[Tooljunkie]

Cleaned driveway. Two hours with the plow. Some big drifts by the shop.
So now under the fargo. Right after my coffee.

 

[zkx14]

Snow is coming down pretty good right now, but just a dusting on the ground so far. They must be using a yo-yo to make the forecast. Last night they were down to 1-3. This morning showed 3-5. Just looked now and it says less than an inch...Whatever. I'll take her car (Journey) to drive to work just in case. Still just 2 wheel, but better tires,traction control and ABS. The Neon does stay nice and straight as it skids to a stop...

 

[MAGA]

Install of new ignition, regulator, sway bar links, (although not pictured) new coil!

 

[Tooljunkie]

Added the 2 short springs i wanted back in the stack,snubbers in and torqued u-bolts. Its suprising how much 50 ft-lbs will flatten springs. About to finish up rear shackles and set it back down. Need to get sheet metal hung back on.

 

[dukeboy440]

Install of new ignition, regulator, sway bar links, (although not pictured) new coil!

View attachment 1715454523

View attachment 1715454524

View attachment 1715454526

Hi newcomer!

 

[jaws]

Install of new ignition, regulator, sway bar links, (although not pictured) new coil!

View attachment 1715454523

View attachment 1715454524

View attachment 1715454526

welcome to the madness.

 

[toolmanmike]

Welcome to FABO and the Coffee Shop.

 

[MOPARMITCH]

welcome to the madness.

Hey....Thats my Line........

 

[Princess Valiant]

Hey....Thats my Line........

What's your line??

Most random post of the day to say "hey .... that's my line" without quoting anyone.

 

[Mopar Tim]

What's your line??

Most random post of the day to say "hey .... that's my line" without quoting anyone.

But we all knew what he meant.

 

[halifaxhops]

Install of new ignition, regulator, sway bar links, (although not pictured) new coil!

View attachment 1715454523

View attachment 1715454524

View attachment 1715454526

Welcome. Be prepared it is Seinfeld here!

 

[MOPARMITCH]

What's your line??

Most random post of the day to say "hey .... that's my line" without quoting anyone.

When ever anyone comes on any of the Mopar sites that I am on, mostly in the Welcome Wagon Thread, I always Post " Welcome to the Madness "....Its a fact you can check...LOL

 

[Mopar Tim]

Hey you two^^^ not usually around during the day, nice seeing you....well, not really seeing you but.....

 

[halifaxhops]

O TAY

 

[halifaxhops]

Actually came in to warm up, now back out to throw labels on stuff to ship!

 

[Mopar Tim]

View attachment 1715454568 O TAY

Ray discovering 'Lectricity.....

 

[Mopar Tim]

Actually came in to warm up, now back out to throw labels on stuff to ship!

NOS Dist is at my po box.....Picking up today...

 

[MOPARMITCH]

Hey you two^^^ not usually around during the day, nice seeing you....well, not really seeing you but.....

I ..CAN... be here all day....But I got Stuff to do..........

 

[MOPARMITCH]

View attachment 1715454568 O TAY

Barrak's 4th grade class picture.....

 

[MOPARMITCH]

Actually came in to warm up, now back out to throw labels on stuff to ship!

Its 77 deg out here in my Shop......

 

[halifaxhops]

No it was his fifth when he was scared white! That's what his Birth certificate said any how.

 

[zkx14]

Its 77 deg out here in my Shop......

Thats a little too warm if actually trying to get any work done.
Oh, wait... nevermind.

 

[Princess Valiant]

Hey you two^^^ not usually around during the day, nice seeing you....well, not really paying attention but.....

Fixed it