What Are You Doing To/With Your Car Today?

[68 dart conv]

Starting to rebuild the second seat for my 1966 Barracuda bought my interior from legendary but they don’t give you a video instruction to add the bolster foam to the bottom foam and top foam so I’m going to document it. I hope it works out!

 

[dadsbee]

Vent glass back in on their new pivot bases...

 

[Clelan]

Got lots done but it doesn't look any different!

Cley

 

[dusterbing the peace]

Lashed valves, cleaned plugs, broke one of the valve cover bolts off in the head putting the valve covers back on weak import metal

Extracted the broken piece, gotta wait for the new bolt to get here, long socket head cap screw that the hardware store doesn’t stock

set the cover in place for a picture since this thread likes pictures

 

[LocuMob]

Just driving across the country to retrieve another car, what else?

I picked up a couple of riders.

 

[JoePole1]

Prepped my K member for gusseting, additional welding and paint. Oven cleaner works really well.

 

[Jeff Seighman]

I picked up a couple of riders.

View attachment 1715900322

They look kind of Shadey to me!

 

[plymouth1937]

I picked up a couple of riders.

View attachment 1715900322

No risk of geting muggd haha

 

[qkcuda]

Checked my wiring work today. Guess I can start putting things back together again

 

[gtxdude]

Turned into a gloomy day about 35 degrees. Figured it was a good time to put in the new plugs and have a cold one.

 

[Red's '72 Dart]

Installed new door gaskets!

 

[dadsbee]

Well I put the Bee and the Swinger into the bunkbed and offered a little bit of protection, but I'm sure hoping that they produce me another car in the next 9 months......

 

[ragtopfury]

Got most of the left side stripped. Had my 14 yr old son out there with me for a couple of hours.

 

[dadsbee]

Time to fix the transmission leaks on this one now that the Dart is done. This one's been weeping for 30+ years...

 

[dadsbee]

Well if it wasn't leaking before... it sure is now! I'll let that drain while I have lunch....

 

[340wedge]

Well it was really yesterday but local cars and coffee. I got there a little early and the people who run the show got a pretty good pic of my car.

 

[dadsbee]

 

[DARTGAME]

I need to do the same on my dart

View attachment 1715902060

 

[dadsbee]

I need to do the same on my dart

Did mine the hard way the other day...
1969 Dodge Dart Swinger clean up

 

[JoePole1]

I need to do the same on my dart

Me three. Trans is out. Should be easy. Will see.

 

[dadsbee]

Me three. Trans is out. Should be easy. Will see.

Make sure you do the throttle shaft seal while you're there... as that overlooked gem is usually the leaker.

 

[JoePole1]

Make sure you do the throttle shaft seal while you're there... as that overlooked gem is usually the leaker.

Please enlighten me bee. I ordered the top/case seal from RA but didn't see any additional shaft seals. Is it underneath that? Got a part number?
Otherwise i'll check my service manual.

 

[JoePole1]

Finished up the K member work and paint.

 

[dicksmidlac]

Got my bumper and hideaway headlights restored for my 72 Charger

 

[dadsbee]

Please enlighten me bee. I ordered the top/case seal from RA but didn't see any additional shaft seals. Is it underneath that? Got a part number?
Otherwise i'll check my service manual.

Shown if you follow the link I showed above.. 1969 Dodge Dart Swinger clean up It's a bugger to find these days and I also show where I got mine. There is the larger shifter shaft seal and then the smaller throttle shaft seal inside the shifter shaft.