No, I don't have a convertible. But it has always interested me how they work. I have followed a lot of posts on this board that don't directly apply to my project, but I still enjoy seeing how folks approach a challenge.
What Are You Doing To/With Your Car Today?
- Thread starter MobileCustoms
- Start date
-
Can't "Like" that... Ugh
I'm so frustrated with Aeromotive.
I bought their 2 chamber regulator (13220) and when we did a systems check, a large stream of fuel started shooting out of the top.
After inspection, the diaphragm looked like hammered dogsh!t. Whomever assembled this at the factory didn't align the bolt holes correctly and then proceeded to bolt it down anyway and tear the gasket. Fuel then bypassed the diaphragm causing the leak. Luckily this happened at my shop and not while driving.
It's been 5 days and Aeromotive has not responded back after multiple calls and an email. I'm about to go full Karen.
I bought their 2 chamber regulator (13220) and when we did a systems check, a large stream of fuel started shooting out of the top.
After inspection, the diaphragm looked like hammered dogsh!t. Whomever assembled this at the factory didn't align the bolt holes correctly and then proceeded to bolt it down anyway and tear the gasket. Fuel then bypassed the diaphragm causing the leak. Luckily this happened at my shop and not while driving.
It's been 5 days and Aeromotive has not responded back after multiple calls and an email. I'm about to go full Karen.
HankRearden
Well-Known Member
Not messing with the Dart today. Since I cant get the d200 into a building right now,I am going to attempt to use the front end loader and pallet forks on my compact tractor to put the magnum 5.9 in it.
So in case I die or get horribly maimed uhh that's where i'll be.
Also if I ever say I need another project before a couple are done someone please shoot me and put me out of my misery.
So in case I die or get horribly maimed uhh that's where i'll be.
Also if I ever say I need another project before a couple are done someone please shoot me and put me out of my misery.
Yesterday put on trans inspection cover, new tires on cop wheels and polished the hubcaps.
I detailed my battery and added the correct positive battery cable. It's the little things that bug me!
skep419
No show, all go!
So slow, but at least some progress.
DartGTDan
'71 Dart GT Fan
Saturday (9-23-23) my buddy and I met up with @72Dart6pack at his sister's State Farm office during the North Gratiot Cruise.
72Dart6pack
Harder Better Faster Stronger.
Wow! Someone built a nice car! Wonder who it could be? ( Just something I threw together) Cough Cough!
I did some refurbished rotors, new pads, calipers and brake hoses on the front of my 74 Duster project. I did this after preping and between coats of paint on some nice "cop wheels" I picked up yesterday. 3 coats of satin black and 3 of satin clear.
Now I just have to resist the urge to put them on while the paint cures for a couple days
Now I just have to resist the urge to put them on while the paint cures for a couple days
mopardude318
Well-Known Member
I had the seat reupholstered in my ‘74 W200. Tricolor to match my truck, kinda.
skep419
No show, all go!
Very sharp!
Ant
Well-Known Member
I'm letting the rain wash my car today.
Cleaning and painting the dash core. Pads are in decent enough shape not to have to replace them. Top pad is excellent. The bottom ones are a little dinged up, but not too bad.
Today we're heading out to the annual HPAC Mopar show here in Kansas City. I'm not going to do the judged portion but I spent the afternoon yesterday doing a little cleaning.
Looks great Brian
Not a huge amount of progress, but a big win today figuring out the crankshaft pulley misalignment. Thanks @Princess Valiant for the pulley identification thread. Figured out that I had.a 69 and up, single- groove, Non-A/C pulley.. I was also fortunate enough to dig out a pre-69, single- groove, non-A/C pulley from the parts bin!
Ready to move forward again.
Ready to move forward again.
DartGTDan
'71 Dart GT Fan
Running some errands this morning
72Dart6pack
Harder Better Faster Stronger.
Fixing my goofy turn signal switch
Intake installed...
Used gun blue on the bolt heads, then VHT engine clear over the top.
Fabricated a bracket to mount the coil
New valve cover gaskets and went from bolts to studs.
Mocked it up to Check clearances with the Holley on top. So far so good
Used gun blue on the bolt heads, then VHT engine clear over the top.
Fabricated a bracket to mount the coil
New valve cover gaskets and went from bolts to studs.
Mocked it up to Check clearances with the Holley on top. So far so good
-
